FUNAI D8B-N8110ZB
Guía de consulta rápida

Manual Channel Preset
Manual channel preset enables you to manually tune in a channel. 1) Press 2) Press , then . or to select �INITIAL� , . to select �CH TUNING�, . to select �MANUAL� ,

MENU TIMER SET UP INITIAL

Loading and Playing a DVD
STANDBY-ON SPEED/ SYSTEM
T-SET OPEN/CLOSE

1 4
CLEAR C.RESET

2 5 8 0

3
CHANNEL

6 9 +10
DVD MODE

then press 3) Press or then press 4) Press or

INITIAL CH TUNING CLOCK

7

DISPLAY

VCR

1) Turn on the TV, amplifier and any other components connected to the unit. 2) Set the TV and audio receiver (commercially available) to the correct channel. 3) Press and confirm that the DVD OUTPUT indicator is lit. to switch to DVD mode. If not, press

PLAY STOP
REC/OTR SKIP PAUSE

then press . 5) Press or to select �POSITION�, then press . When a weak signal is received in Manual Tuning mode, you can change the background to solid blue or the static screen by pressing . or

CH TUNING AUTO MANUAL MOVE

TOP MENU

SEARCH ENTER

AUDIO

4) Press

to open the disc loading tray and place the disc on

MENU

the tray, with the label side up.
RETURN A-B

SETUP

ZOOM

SUBTITLE

ANGLE

REPEAT

MANUAL POSITION CHANNEL DECODER SKIP P08 008 [OFF] [OFF]

5) Press . The tray will close automatically and playback will start. � For DVDs with a title menu recorded, the screen will display the title. 6) Press to stop playback. Note: � A �prohibited icon� may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by this unit or the disc.

6) Press the Number buttons,

to select a position number from 01-99, then press . 7) Press or to select �CHANNEL�, then press . 8) Press or to start scanning. The unit's tuner will begin to search up or down automatically. When a channel is found, the unit will stop searching and the picture will appear on the TV Screen. You can select desired channel number by using the Number buttons. You must refer to the Channel Plan table and press three digits to select the channel number. (To select channel 24, press 9) Press to exit.

Channel Plan
CH Indication 01 � 10 21 � 69 74 � 78 80 � 99, 100 121 � 141 TV Channel IRA � IRJ, GAP E21 � E69 X, Y, Z, Z+1, Z+2 S1 � S20, GAP S21 � S41

0

button first and then press

2

and

4

.)
STANDBY-ON SPEED/ SYSTEM
T-SET OPEN/CLOSE

To Select a Channel
You can select a channel using CHANNEL ( / ) or directly pressing the Number buttons on the remote control.

1 4 7
CLEAR C.RESET

2 5 8 0

3
CHANNEL

6 9 +10
DVD MODE

DISPLAY

VCR

Questions and Help on this products, please call

Help Line: 0870 383 3010 in the UK.