FUNAI D8B-N8110ZB
Manual de Usuario

E8G01BD(EN).fm Page 12 Monday, December 4, 2006 2:48 PM

VCR Operation
VCR Features Ensure that all VCR setting begins in VCR mode by pressing VCR. (Make sure that the VCR OUTPUT indicator is lit.) Playback 1) Turn on the TV and select the video channel on the TV. 2) Insert a pre-recorded tape. �The unit will turn on automatically. If the eraseprevention tab has been removed, the unit will start playback automatically. �If the unit�s power was already on, press VCR to switch to VCR mode. 3) If playback does not start automatically, press VCR, then press PLAY B. <If a tape is already in the unit...> �Using the buttons on the unit Just press PLAY B on the unit. Power will automatically turn on and playback will start. (Direct Button Operation) �Using the buttons on the remote control Press STANDBY-ON to turn on, and then press PLAY B. 4) Press STOP C to stop playback.
Tracking Adjustment

Auto Repeat Playback The unit has an auto repeat function that allows you to repeat a tape indefinitely without touching PLAY B. � Use the remote control for this procedure. � Insert a pre-recorded tape. 1) Press VCR, then MENU. 2) Press K or L to select �SET UP�, then press B. 3) Press K or L to select �AUTO REPEAT�. 4) Press B so that �ON� appears next to �AUTO REPEAT� on the TV screen. �When in Stop mode, Auto Repeat mode will start automatically. �If the on-screen menu still remains, press MENU to exit, then press PLAY B.
Note: �

Once you select the Auto Repeat mode, it stays in effect even after you turn off the unit.

To Stop Playback Press STOP C. To Exit the Auto Repeat Mode

Repeat steps 1) to 3). Then, press B. �OFF� will appear next to �AUTO REPEAT� on the TV screen. Press MENU to exit.
MENU TIMER SET UP INITIAL MENU TIMER SET UP INITIAL

� Tracking adjustment will be activated automatically (Digital Tracking function) when you start playback. � When playing pre-recorded tapes or tapes recorded on the units other than your own, noise lines (black and white streaks) may appear on the playback picture. If this occurs, you can adjust the tracking control manually by pressing CHANNEL (K/L) until the streaks disappear. To return to the DTR function, stop the tape once and start playback again. � You can reduce the noise lines by pressing CHANNEL (K/L) in Slow mode, too. Slow tracking adjustment is not set automatically. � In the Still mode, press g, and press CHANNEL (K/L) until the streaks disappear. To return to the Still mode, press PAUSE F again.
Speed Search 1) Press g or h during playback to view a videotape at a

SET UP AUTO RETURN [ON] AUTO REPEAT [ON] PICTURE [NORMAL]

high speed in either a forward or reverse direction. In this mode, the sound will be muted. 2) Press the button again, the unit will now search in super high speed. (This function will not operate for a NTSC tape.) 3) Press PLAY B to return to normal playback.

Still Picture Press PAUSE F during playback to view a still picture on the

TV screen. � When the picture begins to vibrate vertically, stabilize the picture by pressing CHANNEL (K/L) in the Still mode. � After the unit has been in Still mode for 5 minutes, it will stop automatically to protect the tape and the video head. <Note for �Speed Search� and �Still Picture�> � Usually there will be video �noise� lines (black and white streaks or dots) on the screen. This is normal. The still picture will, in addition to containing the �noise� lines, be black and white. This is not a fault of the unit but merely a by-product of the technology involved in producing a DVD/VCR with LP mode.
Slow Motion

Picture Select This function enables you to select the picture quality of a tape. � Use the remote control for this procedure. 1) Press VCR, then MENU. 2) Press K or L to select �SET UP�, then press B. 3) Press K or L to select �PICTURE�. 4) Press B until the desired mode (NORMAL, SOFT or SHARP) is indicated on the TV screen. 5) Press MENU to exit. Note: � Once you select the Picture Select mode, it stays in effect even after you turn off the unit.
MENU TIMER SET UP INITIAL MENU TIMER SET UP INITIAL

� Press PAUSE F, then g to reduce the playback speed. The unit mutes the sound during slow motion. You can control the speed by pressing g (faster) or h (slower). Press PLAY B to return to normal playback. � If it is left in the Slow mode for more than 5 minutes, the unit will automatically switch to the Stop mode.

SET UP AUTO RETURN [ON] AUTO REPEAT [ON] PICTURE [NORMAL]

12

EN