KORG D3200
Manual de Usuario

34: Mono ER
Type Sharp, Loose, Modulated, Reverse Selects the decay curve for the early reflection ER Time 10...800msec Sets the time length of early reflection Predly (Pre Delay) 0...200msec Sets the time taken from the original sound to the first early reflection Dry:Wet Dry, 1:99...99:1, Wet Sets the balance between the effect and dry sounds LoDamp (Low Damp) THRU, 21Hz...8.00kHz Sets the damping amount in the low range HiDamp (High Damp) 53Hz...20.0kHz, THRU Sets the damping amount in the high range

Category: Modulation&Pitch Modulation/Pitch-type effects

37: Mono Chorus
0.02...20.00Hz Sets the LFO speed *Depth 0...100 Sets the depth of LFO modulation PreDly (Pre Delay) 0.0...50.0msec Sets the delay time Dry:Wet Dry, 1:99...99:1, Wet Sets the balance between the effect and dry sounds Waveform (LFO Waveform) Triangle, Sine Selects LFO Waveform LoDamp (Low Damp) THRU, 21Hz...8.00kHz Sets the damping amount in the low range HiDamp (High Damp) 53Hz...20.0kHz, THRU Sets the damping amount in the high range Waveform (LFO Waveform) Triangle, Sine Selects LFO Waveform Analog (Analog Saturation) 0...100% Sets the amount of analog distortion *Speed (LFO Speed)

35: Mono Delay
Time (Delay Time) Feedback (Feedback) In Level (Input Level) Dry:Wet 0...2.730sec Sets the delay time �100...+100% Sets the feedback amount 0...100% Sets the input level to the effect Dry, 1:99...99:1, Wet Sets the balance between the effect and dry sounds LoDamp (Low Damp) THRU, 21Hz...8.00kHz Sets the damping amount in the low range HiDamp (High Damp) 53Hz...20.0kHz, THRU Sets the damping amount in the high range Analog (Analog Saturation) 0...100% Sets the amount of analog distortion

38: Mono Flanger
*Speed (LFO Speed) *Depth Feedback 0.02...20.00Hz Sets the LFO speed 0...100 Sets the depth of LFO modulation �100...+100% Sets the feedback amount Dry, 1:99...99:1, Wet

36: Mn.Multitap Delay (Mono Multitap Delay)
Tap1Time 0...2.730sec Sets the delay time of Tap1 Tap2Time 0...2.730sec Sets the delay time of Tap2 Tap3Time 0...2.730sec Sets the delay time of Tap3 WetLevel 0...100% Sets the level of the effect sound Tap1Level 0...100% Sets the output level of Tap1 Tap2Level 0...100% Sets the output level of Tap2 Tap3Level 0...100% Sets the output level of Tap3 DryLevel 0...100% Sets the level of the direct sound LoDamp (Low Damp) THRU, 21Hz...8.00kHz Sets the damping amount in the low range HiDamp (High Damp) 53Hz...20.0kHz, THRU Sets the damping amount in the high range

Dry:Wet Waveform (LFO Waveform)

Sets the balance between the effect and dry sounds Triangle, Sine Selects LFO Waveform LFO Shape �100...+100% Determines how much the LFO waveform is changed Fb HiCut (Feedback High Cut) 53Hz...20.0kHz, THRU Sets the damping amount in the high range Delay 0...50.0ms Sets the left/right delay time LoDamp (Low Damp) THRU, 21Hz...8.00kHz Sets the damping amount in the low range HiDamp (High Damp) 53Hz...20.0kHz, THRU Sets the damping amount in the high range

39: Mono Phaser
0.02...20.00Hz Sets the LFO speed Depth 0...100 Sets the depth of LFO modulation Resonance �100...+100% Sets the resonance amount Dry:Wet Dry, 1:99...99:1, Wet Sets the balance between the effect and dry sounds Manual 0...100 Sets the frequency to which the effect is applied LFO Shape �100...+100 Determines how much the LFO waveform is changed *Speed (LFO Speed)

160