7.4. Condensed Water Drainage.
This air conditioner employs a �Slinger-Up System� which is designed to splash the condensed water on the condenser coil for maximum cooling efficiency, thus producing a splashing sound. If the splashing sound annoys you, you can provide an outside drainage by using the following procedure which may, however, cause a small loss of performance. 1. Slide out the Chassis from the Cabinet. 2. Remove the rubber plug from the Base Pan. 3. Install the Drain Pan at the right corner of the Cabinet with 2 screws. 4. Connect the drain hose to the outlet of Drain Pan bottom. 5. Slide the Chassis back into the Cabinet. Note: Drain hose or tubing can be purchased locally to satisfy your particular needs.
