|
No hay comentarios de productos.
3 Using the Tape Deck
Making tape recordings
You can make tape recordings from any other component in the system, and also from an external component connected to the auxiliary inputs. If you're recording from CD or MD, it�s usually most convenient to use the synchro-recording feature (see Automatically recording a CD or MD, opposite). For other sources, see Recording other sources on page 10. To set the timer for recording at a later time, see Recording using the timer on page 11. Once recording has started, you can't switch to another component until either the recording has stopped, or you pause the recording. So, for example, you can't switch over to the tuner while you're recording a CD. When recording, the volume, bass, treble and other sound controls have no effect on the recording. This means that you can record something with the volume turned right down, if you want. Before recording, check that the cassette erase tabs have not been broken, and that the tape is either a type I (normal position) or type II (high position/CrO2)�you can't record on type IV (metal) tapes using this deck. If you're recording from the start of a tape, it's a good idea to wind the tape on a little so that you don't accidently start recording over the leader tape. You can either do this by hand, or load the tape into the deck and play the tape for 5�6 seconds.
8
En
|
