Troubleshooting (continued)
English
â� Display Settings
The picture is dark. The picture is whitish. Something is wrong with the picture. The picture is light in color.
The screen is not adjusted properly. aMake every adjustment of the screen.
39
â� Radio
Poor reception or noise
Antenna installation or wiring of antenna cable is faulty. aCheck whether the antenna mounting position and its wiring are correct. In addition, check to see whether the antenna ground is securely connected to the chassis. No power is supplied to the antenna amplifier (when using a film antenna, etc.). aCheck the wiring of the antenna power lead.
The number of auto preset stations is less than 6. Preset stations cannot be stored.
The number of receivable stations is less than 6. aMove to an area where receivable stations number is maximum, and try presetting. The contact of the battery lead is poor, or the battery lead is not always powered. aMake sure that the battery lead is connected securely, and preset stations again.
â� CD
No playback or disc ejected
The disc is inserted upside down. aInsert a disc correctly. There is a flaw or foreign object on the disc. aRemove the foreign object, or use a flawless disc. There is a flaw or foreign object on the disc. aRemove the foreign object, or use a flawless disc. The unit is not sufficiently secured. aSecure the unit to the console box. The unit is tilted at over 30� in the front-to-end direction. aMake the angle 30� or less. Something such as a peeled label obstructs the disc coming out. aPress and hold the [u TILT] for more than 10 seconds (disc forced ejection). In case that the disc forced ejection does not work, consult your dealer. The microcontroller in the unit operates abnormally due to noise or other factors. aUnplug the power cord and plug it again. In case the unit is still out of order, consult your dealer.
