PANASONIC CQ-VD5005U
Manual de Servicio

5 Disassembly and Assembly Instructions
5.1. How to Remove the Flexible PCB
Disassembly of Display Unit
Front Panel . Remove the two screws( ) from the Front Panel. Monitor 1. Pull out the Monitor to the arrow direction.

Front Panel

Monitor 2. After removing the two screws ( remove the Plate. ) and one screw ( ),

2. After removing the screw ( the Connector Cover.

) from the bottom side, remove

Connector Cover 3. Disconnect the FFC (CNP3), which is connected to the Front Panel, from CN707 on the Main PCB (E-3173Aa).

Plate 3. After removing the four screws ( ), remove the Monitor Ass'y.

Front Panel

CN707 Slide Mechanism Ass'y (Monitor Ass'y) FFC (CNP3) 4.Remove the Front Panel. 4. Disconnect the FPC Ass'y from CN452 on the TFT PCB (E-9939A).

FPC Ass'y Front Panel CN452

10