PANASONIC CQCB8901U
Manual de Usuario

General
The sound type each of which is adjusted with 7 bands changes every time you press [SQ].
SRC

CQ-CB8901U

You can make fine adjustments to the currently selected SQ presetting in ROCK, POP, VOCAL, JAZZ, or CLUB in accordance with your car type or taste.

SRC

CQ-CB8901U

1 Hold down [SQ] (Sound Quality) for 2
sec. or more.
1. FLAT (default) 6. CLUB

4 Hold down [}] or [{] for 2 sec. or
more to confirm your adjustment.
The targeted SQ preset appears. 2. ROCK 5. JAZZ

2 Adjust each frequency.
Note: If you press [DISP], the presetting is canceled. The presetting is active until another SQ preThe existing adjustment is overwritten with new adjustment. Notes: ¡ FLAT is not changeable. ¡ If no operation takes place for more than 10 seconds, the display returns to the regular mode. ¡ This adjustment is executable in the AUDIO menu as well. (a page 34) ¡ If you hold down [BAND] for 2 sec. or more on the SQ call-up screen, the presetting that is called up can be turned into the default. set is called up. 4. VOCAL

3. POP

Notes: ¡ Setting of SQ, bass/treble and volume are influenced one another. If the influence mentioned above causes distortion to the audio signal, readjust bass/treble or volume. ¡ Each SQ (except FLAT) level is changeable. (a page 19)

[[]: Higher frequency []]: Lower frequency
q : Level Up w : Level Down

3 Hold down [}] or [{] for 2 sec. or
Lights when activated.

more to confirm your adjustment.
Note: You can select a SQ preset to be targeted with [}] and [{] (and [2]-[6] on the remote control).

(SQ: Sound Quality)

18

SQ Selection Based on Genre

CQ-CB8901U

Change of SQ Presetting

CQ-CB8901U

General
19