PANASONIC CQ-C7301N
Manual de Servicio

CQ-C8351N / CQ-C8301N / CQ-C7301N

1 ABOUT LEAD FREE SOLDER (PbF)
Distinction of PbF PCB: PCBs (manufactured) using lead free solder will have a PbF stamp on the PCB. Caution : � Pb free solder has a higher melting point than standard solder; Typically the melting point is 50 - 70°F (30 40°C) higher. Please use a soldering iron with temperature control and adjust it to 700 ± 20°F (370 ± 10°C). In case of using high temperature soldering iron, please be careful not to heat too long. � Pb free solder will tend to splash when heated too high (about 1100°F/600°C) � This lead free solder will be used for the products after serial No. 1,000,001.

[CD DECK BLOCK] This model has no servo alignment microcomputer controls the servo circuit points because

6 DIMENSIONS

2 FEATURES
� MP3/WMA Playback from CD-R/RW � Fully Motorized Front Panel � Innovated APM (Auto Preset Memory) method � Six Preset Modes (FLAT, ROCK, POP, VOCAL, JAZZ, CLUB) � SQ7 (7 Bands Sound Quality) � CD Changer Control � DVD Changer Control � Customize the Display (Customize Function) � Delightful sound space thanks to system buildup � The difference among these models� are mentioned below.

7 LASER PRODUCTS

3 REPLACEING THE FUSE
Use fuses of the same specified rating 15 amps. Using different substitutes or fuses with higher ratings, or connecting the unit directly without a fuse, could cause fire or damage to the stereo unit.

4 MAINTENANCE
Your products is designed and manufactured to ensure a minimum of maintenance. Use a soft cloth for routine exterior cleaning. Never use benzine, thinner or other solvent.

5 NOTES
[RADIO BLOCK] Do not align the AM/FM package block. When the package block is necessary, it will be supplied already aligned at the factory. 3