|
|
|
Usuarios conectados
Actualmente hay 5741 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
Customizing Your Monitor
Getting Started Customizing Your Monitor
UsingtheZOOMOn-screen Display
The ZOOM settings allow you to enlarge or reduce the picture. Once the setting is adjusted, it will be stored in memory for the current input signal.
Using the COLOR On-screen Display
You can change the monitor�s color temperature. For example, you can adjust or change the colors of a picture on the screen to match the actual colors of the printed picture. Once the setting is adjusted, it will be stored in memory for all input signals received.
4
Fine tuning the color temperature Press the ¨./> buttons to select R (red), G (green), or B (blue) and adjust by pressing the >?// buttons.
COLOR
1 R G B 6500K 9300K 76 50 50
UsingtheSCREENOn-screen Display
You can adjust convergence settings to eliminate red or blue shadows that may appear around objects on the screen. Adjust the CANCEL MOIRE function to eliminate wavy or elliptical patterns that may appear on the screen. Adjust the LANDING function to correct color imbalances at the four corners of the screen due to influence from the earth�s magnetism. Once CANCEL MOIRE is adjusted, it will be stored in memory for the current input signal. All other adjustments will be stored in memory for all input signals received.
1
Press the MENU button. The MENU OSD appears.
MENU
1
Press the MENU button. The MENU OSD appears.
MENU
The �5000K,� �6500K� or �9300K� disappears and the new color settings are memorized for each of the three color modes. The color temperature modes change as follows: 5000Kn 1, 6500Kn 2, 9300Kn 3 The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again. To reset, press the RESET button while the OSD is on. The
1
2
Press the ¨./> and >?// buttons to select � ZOOM,� and press the MENU button again. The ZOOM OSD appears.
ZOOM
2
Press the ¨./> and >?// buttons to select � COLOR,� and press the MENU button again. The COLOR OSD appears.
COLOR
5000K R G B 6500K 9300K 50 50 50
Press the MENU button. The MENU OSD appears.
MENU
2
H V
26 73
Press the ¨./> and >?// buttons to select � SCREEN,� and press the MENU button again. The SCREEN OSD appears.
SCREEN
1-5
3
Note
EN F
Press the >?//buttons to adjust the picture zoom.
3
Press the >?// buttons to select the color temperature.
selected item is reset to the factory settings.
TOP BOT ADJ 26
ES C
/ . . . to enlarge the picture ? . . . to reduce the picture
H CONVERGENCE
3
The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again. To reset, press the RESET button while the OSD is on. There are three color temperature modes in the OSD. The preset adjustments are: 5000K, 6500K, 9300K
Press the ¨./> buttons to select the item you want to adjust.
The picture zoom adjustment will stop as soon as either the horizontal or vertical size reaches its maximum or minimum value.
Select
To
adjust the horizontal convergence
H CONVERGENCE adjust the vertical convergence V CONVERGENCE TOP V CONVER TOP BOT V CONVER BOTTOM adjust the screen�s upper vertical convergence adjust the screen�s lower vertical convergence
(continued)
12
13
|
|
|
> |
|
