1 Prepare the music source you want to
listen to when the system turns on.
8 Press ./> on the remote
repeatedly until the music source you want appears.
� CD: Load a CD. To start playing from a specific track, make a program (see �Programming the CD tracks� on page 9). � Tape: Load a tape with the side you want to play facing towards you. � Radio: Tune in the preset radio station that you want (see �Listening to the radio� on page 11).
The display changes as follows:
t TUNER y CD T t TAPE T
9 Press ENTER on the remote.
The starting time, the stopping time, and the music source appear in turn, then the original display returns.
2 Adjust the volume. 3 Press TIMER SET on the remote. 4 Press ./> on the remote
repeatedly until �SET DAILY� appears in the display.
10Press @/1 to turn off the system.
To Do this
Check the settings
Press TIMER SELECT on the remote repeatedly until �c DAILY� appears in the display. The preset items appear in turn. Press TIMER SELECT on the remote repeatedly until �c DAILY� disappears from the display.
�SET DAILY� scrolls and �c DAILY� appears in the display.
5 Press ENTER on the remote.
�ON TIME� appears, then the hour indication flashes.
Turn off the timer
6 Set the starting time.
Press ./> on the remote repeatedly to
Tip
set the hour, then press ENTER on the remote. The minute indication begins flashing next. Press ./> on the remote repeatedly to set the minute, then press ENTER on the remote. �OFF TIME� appears, then the hour indication flashes again.
Once you set the timer, the time settings will remain in the system�s memory until you change them, even when you turn the system or the timer off. The settings that were last used will be in effect when you turn the timer on again.
Notes
� The system will turn on 15 seconds before the specified starting time. � When you have set the Sleep Timer, the Daily Timer will not operate until the Sleep Timer Function is turned off. � You cannot operate the Daily Timer and the timer recording at the same time.
