SONY CMT-CQ1
Manual de Usuario

Other operations
To Do this

Check the program order Cancel Program Play

Add a track to the end of the program Erase the program Press CLEAR on the remote in stop mode. Each time you press the button, a track is cleared from the end of the program.
Tips

Press ./> repeatedly during program play. Press PLAY MODE on the remote in stop mode repeatedly until both �PGM� and �SHUF� disappear. Perform steps 1 � 4 in stop mode.

Tuner

Presetting radio stations
You can preset up to 20 FM stations and 10 AM stations. You can then tune in any of those stations simply by selecting the corresponding preset number. Use buttons on the remote for the operation.

Automatic tuning preset
You can automatically tune in all of the stations that can be received in your area and then store the radio frequency of the desired stations.

� The program you made remains after Program Play finishes. To play the same program again, press CD N. However, the program is cleared when you open the disc tray. � If you select �CD AL� in step 3, you can select all tracks on the disc at once.

1 2 3

Press TUNER BAND repeatedly to select FM or AM. Press TUNING MODE repeatedly until �AUTO� and the frequency appear in the display. Press TUNING +/�.

The frequency changes as the system scans for a station. Scanning stops automatically when a station is tuned in. At that time, �TUNED� and �STEREO� (for stereo program only) appear.
If �TUNED� does not appear and the scanning does not stop

Set the frequency of the desired radio station as described in steps 2 through 6 of �Manual tuning preset� (page 9).

4

Press TUNER MEMORY.

The preset number flashes. The stations are stored from preset number 1.

Preset number

8GB