Remove the Rear Case 50 (M). (Screws � 20) Remove the Y DRIVE Assy. (Connector, Screws � 8)
Y DRIVE Assy
8
Front Case 50 (M)
�2
8
�2
8 2 3 4
Loosen a rivet. Remove the Lead Cover MX. Pull out a Flexible Cable. SIDE KEY Assy
1
�3
8
�2
8
�2
2
Lead Cover MX
4
Rivet 3 Turn it not to press the rivet. (Because when the rivet presses, Lead Cover fit in once again.) MX It is easy to remove when pull out the Lead Cover MX with the rivet before completely removing the rivet.
5 6
Remove bottom by the fulcrum at the top of Front Case (50). Remove the Front Case (50).
9
Reverse the SCAN (A) and SCAN (B) Assemblies.
10 When it is necessary, exchange the ROM.
SCAN (A) Assy
Front Case 50 (M) ROM �6 Rear Case
6
Aluminum Materials It is the structure that a hook of Front Case (50) was put between with Rear Case and aluminum materials.