JVC CHX200
Manual de Servicio

Lifter Unit

1. Unhook the elevator spring located on the front side of the unit. (Be sure to first unhook the spring from the lifter side as shown in the upper part of the diagram.) 2. Lift the lifter unit upward, then remove the lower rod to remove the lifter unit from the chassis.

Unhook this part first

Lifter Bracket

1. Remove the two lifter bracket fixing screws (4) located on the back of the lifter unit. 2. Remove the lower rod.

Fig. 21

Proper orientation

Side Bracket and Traverse Mechanism

1. Remove the two side bracket unit fixing screws (5) to disconnect the side bracket unit from the lifter unit. 2. Remove the three shafts on the traverse mechanism assembly from the lifter unit.

Lift up the lifter unit

For reassembling, refer to the reassembling procedures.

Lower Rod

4

Fig. 22

4

Fig. 23

5 Remove from the lifter unit

5

Fig. 24
Remove from the lifter unit