The cooktopfeaturingconventional urface burnerslifts s up for easy cleaningof the burner box area. To raise the "lift-up" ¢ooktop: When cool, grasp the front edgeof the cooktop and gently lift up until the two supportrods at the front of the cooktopsnap into place.
Burnergrates must be properly positioned beforecooking. Burner grates are durable but may graduallylose their shine due to usage and high temperatures. Grates for the porcelaincooktop are square. When installing square grates, sides are at front and rear.
,_
placeindentedsides togetherso straight CAUTION: Do not operatea surface burnerwithouta chip without a pan to absorb the intense heat from the burner flame. pan onthe grate. The porcelainfinish on the grate may
I
t
To lower the top: Hold the front edge of the cooktopand carefully pushback on each support rod to releasethe notched support.Then gently lower the top into place.The support rods will slide into the cooktopframe.
CAUTION: Before replacingthe light bulb, DISCONNECTPOWER TO RANGE. Be sure the bulb is cool. Do not touch a hot bulb with a damp cloth as the bulb may break. To turn on oven light" Push the rocker switch locatedon the backguard. To replace oven light bulb: 1. Disconnect owerto range. p cover.NOTE:Bulbcoverwillfall ifnot held in place whileremoving wireretainer, 3. Removebulbcover. 4. Removelightbulband replacewitha 40 watt appliance bulb. 5. Replacebulbcoverand securewithwireretainer. 2. Holdbulbcoverin placethenslidewireretaineroff 6. Reconnect owerto range.Resetclock. p
BULB COVER
The sealed burner cooktopis designedwith two contour wellsto catch and contain spills. Becauseof this design it is not necessaryto lift upthe cooktoptoclean underneath.To preventdamage to the gas tubingor top, donotattemptto liftorremovethe cooktop.
