ENGLISH
Connecting
1 Turn the computer off.
Don't use the standby or hibernation function. ( OPERATING INSTRUCTIONS "Starting Up/Shutting Down") Connect the mini port replicator to the connector of the computer with "This side up" facing upwards. Mini Port Replicator Connector
2
Disconnecting
1 Turn the computer off.
Don't use the standby or hibernation function. ( OPERATING INSTRUCTIONS "Starting Up/Shutting Down") While pushing the connector's lock button, pull the connector out straight.
2
NOTE
If the mini port replicator is connected to the computer, connect the LAN cable, the external display cable, or the AC adaptor to the ports or jack on the mini port replicator. You cannot use the LAN port, the external display port, or the DC-IN jack on the computer. When devices connected to USB ports (2a, 2b, 2c) will not operate: � Confirm that the consumption current for the connected device is 100 mA or less. If the current exceeds 100 mA, connect the device to USB port 1 or to a USB port on the computer. � Turn off the power saving function on the USB2.0 USB Root Hub using the following procedure: A In [Device Manager], click [View] - [Devices by connection]. B Click for the following items in order. [ACPI Uniprocessor PC] - [Microsoft ACPI-Compliant System] - [PCI bus] [Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C] C Right-click [USB Root Hub] (displayed below [Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C], and click [Properties]. D Remove the checkmark from [Allow the computer to turn off this device to save power] in [Power Management] and restart the computer. For more information about the settings and preparations of the peripheral devices, refer to the peripheral devices' own operating instructions.
