Names and Functions of Parts
Using the Tether
The tether prevents the stylus (included) from falling accidentally. It can be attached to the stylus holder ( page 11).
Attaching the Tether
1
Tether
2
CAUTION
Getting Started
Do not carry the computer by gripping the tether.
Before Using the Stylus
The computer is supplied with the stylus holder attached to the right side of the internal display. If you want to attach the stylus holder to the left side of the display, use the following method.
Attaching or Removing the Stylus Holder
CAUTION
Do the following before attaching or removing the stylus holder. � Turn off the computer. � Remove the battery pack and AC adaptor. � Remove the stylus from the stylus holder. When attaching or removing the stylus holder, work in a level place. To attach or remove the stylus holder, use a no. 0 precision Phillips screwdriver.
â� Open the display slightly, and stand the computer on its side. (Refer to the illustration on the
left.)
� Using the screwdriver, remove the screws (A, B, C) from the right side of the display.
This detaches the stylus holder (D). � Reattach the screws (A, B, C) to the right side of the display.
� Turn the computer over, so that the left side of the display is at the top. � Using the screwdriver, remove the screws (A, B, C) from the left side of the display.
� Be careful not to remove the screw (E). � Attach the stylus holder (D) removed in step � to the left side of the display, and fasten the screws (A, B, C).
