PIONEER CDXM8086ZT/ZT91/E
Manual de Servicio

CDX-M8086ZT ,M8086ZT-91,M8186ZT ,M8186ZT-91

7.2.2 DISASSEMBLY
- Removing the Case and Holder(Fig.19)
1. Remove the six screws. 2. Remove the upper case, lower case and holder.

- Removing the Extension Unit(Fig.20)
1. Remove the one screw. 2. Unbend the two tabs indicated by arrows until straight. 3. Remove the extension unit.

- Removing the Grille Assy(Fig.19)
1. Press the four tabs indicated by arrows and then pull out the grille assy.

- Removing the Main Unit(Fig.20)
1. Remove the two screws and earth. 2. Unbend the tab indicated by arrow until straight. 3. Remove the main unit. NOTE: Connect the extension PCB to the main unit via the connector, with the printing on the connector facing downward.

A

Fig. 20 Fig. 19 NOTE: To prevent screw A from working loose, apply glue between screw A and the main unit when installing the main unit to the CD mechanism unit. Before disconnecting the connector, attach a short pin as illustrated.

49