Boosting the bass sound
� D-bass
You can enjoy a clear and powerful bass sound. The D-bass function boosts the low frequency signal with a sharper curve than conventional bass boost. You can hear the bass line more clearly even while the vocal volume remains the same. You can emphasize and adjust the bass sound easily with the D-BASS control.
Level
D-BASS 3 D-BASS 2 D-BASS 1
Adjusting the frequency of the speakers and the subwoofer(s)
By setting the cut off level of unwanted frequency signals, the speakers connected to the output terminal and/or the subwoofer(s) connected to the sub out terminal will out put a cleare sound image.
Adjusting the frequency of the speakers connected from the output terminal � High Pass Filter (HPF)
To match the characteristics of the connected speakers from the output terminal, you can cut out the unwanted low frequency signals entering the speakers.
0dB
Frequency (Hz)
Adjusting the bass curve
Turn the D-BASS control to adjust the bass level (1, 2 or 3). �D-BASS� appears in the display. To cancel, turn the control to OFF.
Note If the bass sound becomes distorted, adjust the DBASS control or volume.
1 2 3
Press (SOURCE) to select a source (radio, CD, or MD). Press (SHIFT), then press (3) (SET UP) repeatedly until �HPF� appears. Press (5) (n) or (2) (N) repeatedly to select desired setting.
Each time you press (5) (n) or (2) (N), the cut-off frequency in the display changes as follows:
HPF OFF � HPF 80 HZ � HPF 120 HZ
4
Press (SHIFT). When the frequency setting is complete, the display returns to the normal playback mode.
