SECTION 4 TEST MODE
4-1. AF MODE
Connect the TP19 (AFADJ) on the BD board to the ground and turn on the power supply. The AF mode is then activated and the following check can be made. 4-1-1. Fluorescent Indicator Tube Check After confirming display of all on, keep pressing the following button, and the following display is attained. p (STOP) button Keep pressing the §OPEN/CLOSE button, and all on display is attained again. 4-1-2. Key Check All buttons are assigned with numbers respectively, and when each button is pressed, it is counted and its number is displayed. Up to �16� can be counted. A button pressed once is not further counted but the number is displayed. (Table 4-1)
(Display: 01)
� (PLAY) button
count display
button number display
(Display: 02)
Table 4-1.
Button ERASE EDIT/ TIME FADE FILE FILTER ENTER 6 OPEN/CLOSE ( Display 00 12 13 20 23 all light up 01 02 Button P ) 0 CHECK CLEAR P MODE REPEAT TIME Display 03 04 05 06 07 09 10 11
P (PAUSE) button
(Display: 03)
) button
SHUFFLE REPEAT AAUTO SPACE STEP EDIT
p (
(Display: 04)
�
0 button
1 PROGRAM INDEX PEAK B (JUST)
4-1-3. Remote Commander Check Press the ( button on remote commander, and � � � ( on the set turn on. Nothing will be displayed if pressing another button.
