SONY CDPCX235
Manual de Servicio

PULLY AND DISC CENTER HOLE ALIGNMENT
cam base unit

cam bracket (BU adjustment)

(1)

Rotate the cam and adjust to the position shown in the figure.

magnet ass�y

(2)

Check that the state is as shown in the figure.
0.5 � 2 mm disc disc pulley disc hole base unit

Note: The disc should not be fixed.

holder (disc A2)

fixed screw

bracket (BU adjustment)

tapering screwdriver magnet ass�y

(3)

Remove the Magnet ass�y.

(4)

Loosen the fixed screw by 60° to 90°, and move and adjust the bracket (BU adjustment) up and down using a tapering screwdriver so that the positions of the disc hole and disc pulley become A=B or between A:B=2:1 and 1:2.

� 17 �