CDN 36 EXAMPLE OF MIXING USING TWO CD PLAYERS
While playing a disc on PLAYER 1 load a disc into PLAYER 2 and select your next track, match its pitch to the track playing on PLAYER1 and when you are ready use the crossfader on your mixer to fade from PLAYER 1 to PLAYER 2.
PLAYER 1 Load a disc in PLAYER 1 and select the track and press PLAY. PLAYER 1 PLAYER 1
Load a disc and press the OPEN/CLOSE button. PLAYER 2 Load a disc in PLAYER 2 and select the track then play. Load a disc and press the OPEN/CLOSE button. PLAYER 2 Set and edit a start cue point on PLAYER 2
Select the track to be played. PLAYER 2
Press the PLAY button
PLAYER 2
Select the track to be played. PLAYER 2
Press the PLAY button
PLAYER 2
Press the Pause button of PLAYER 2.
Press search and rotate wheel to rapidly look for a cue point. PLAYER 2
Press search to release. Slowly set the right cue point using the jog wheel. PLAYER 2
PLAYER 2
Check you new cue point
Listen with the monitor and press the play button.
Press the cue button then play to be sure of the set cue point. PLAYER 2
Set the player to the Cue point by pressing Cue
PLAYER 2
MIXER
Do a MIX!
With a matching downbeat from Player 1 press the play button.
If you are beat mixing turn on your Pitch adjust and follow the directions for beat matching.
When you are happy with you mix adjust you mixer accordingly.
