PIONEER CDJ-400/WAXJ5
Manual de Usuario

�Applying master tempo�).

ROLL
The playback sound will be affected with pitch and playback time varied in response to the rotation of the jog dial. ¶ When the jog dial was touched, audio will be loop-played then rolled. ¶ When removing hand from jog dial, the sound will gradually settle back into the original sound. ¶ The setting is canceled when the disc is ejected. ¶ ROLL cannot be performed during reverse playback.

7 Selecting range of tempo adjustment
Press the TEMPO ±6/±10/±16/WIDE button.
Each time the button is pressed, the variable range of the TEMPO control slider alternates between ±6 %, ±10 %, ±16 % and WIDE. The tempo can be adjusted in units of 0.02 % when set to ±6 %, units of 0.05 % when set to either ±10 % or ±16 %, and units of 0.5 % when set to WIDE. The variable tempo range for MP3s is ±6 %/±10 %/±16 %. ¶ The set variable range will be shown in the display. ¶ The tempo range will be saved in memory when the power is turned off.

WAH

Adds a filter with cutoff frequency that changes in response to jog dial rotation. ¶ The filter changes into a high-pass filter when the jog dial is turned clockwise; the filter changes into a low-pass filter when the jog dial is turned counterclockwise. ¶ When removing hand from jog dial, the sound gradually settle back into the original sound. ¶ The setting is canceled when the disc is ejected.

Applying master tempo
Press the MASTER TEMPO button during playback.
The MASTER TEMPO button and the [MT] indicator in the display will light, and the speed (tempo) can be changed using the TEMPO control slider without changing the pitch (key). ¶ Due to digital processing of the sound, the sound quality will drop. ¶ The setting will be saved in memory when the power is turned off.

[HOLD function]

Used to maintain the effect that has been created by the turning of the jog dial even after the jog dial�s rotation is stopped.

Press the HOLD button during usage of Digital Jog Break or Scratch Jog Effect function.
¶ If you remove hand from jog dial, the effect at that point will be maintained. ¶ When the HOLD function is turned ON, even if another effect is selected, the setting prior to the new effect selection will be preserved in memory so long as hold is not turned off.

37
<DRB1453> En

English