SHARP CDE100H
Manual de Servicio

CD-E100H CD-E100E

REMOVING AND REINSTALLING THE MAIN PARTS
TAPE MECHANISM SECTION
Perform steps 1 to 6 and 9 of the disassembly method to remove the tape mechanism.
(A1)x1 ø2x7mm Hook (A2)x2

TAPE 1
(A1)x1 ø2x3mm Record/Playback Head

How to remove the record/playback and erase heads (TAPE 1) (See Fig. 7-1)
1. When you remove the screws (A1) x 2 pcs., the record/ playback head can be removed. 2. Move the hooks (A2) x 2 pcs., toward the center position as shown in Fig. 7-1 and then lift the erase head.

How to remove the playback head (TAPE 2) (See Fig. 7-2)
1. When you remove the screws (B1) x 2 pcs., the playback head can be removed.

Erase Head

Figure 7-1

How to remove the pinch roller (TAPE 1) (See Fig. 7-3)
1. When you remove the screw (C1) x 1 pc., the pinch roller can be removed. Note: When installing the pinch roller, pay attention to the spring mounting position.

(B1)x1 ø2x6mm

(B1)x1 ø2x6mm

TAPE 2
Playback Head

How to remove the pinch roller (TAPE 2) (See Fig. 7-3)
1. When you remove the screw (D1) x 1 pc., the pinch roller can be removed. Note: When installing the pinch roller, pay attention to the spring mounting position.

Figure 7-2
TAPE 1
(C1)x1 ø2x4mm

TAPE 2
(D1)x1 ø2x4mm

How to remove the tape motor (See Fig. 7-4)
1. Remove the belt. 2. Remove the screws (E1) x 6 pcs., to remove the motor bracket. 3. Remove the screws (E2) x 3 pcs., to remove the tape motor.

Pinch Roller

Pinch Roller

How to remove the belt (TAPE 1) (See Fig. 7-5)
1. Remove the main belt (F1) x 1 pc., from the tape motor side. 2. Remove the FF/REW belt (F2) x 1 pc.
Tape Motor

Figure 7-3

(E1)x2 ø2x4mm (E1)x2 ø2x4mm

How to remove the belt (TAPE 2) (See Fig. 7-5)
1. Remove the main belt (G1) x 1 pc., from the tape motor side. 2. Remove the FF/REW belt (G2) x 1 pc.
(E1)x2 ø2x4mm
Tape Motor TAPE 2 Main Belt (G1)x1 FF/REW Clutch Ass'y Tape Motor TAPE 1 Main Belt (F1)x1

Motor Bracket

TAPE 2
Main Belt (G1)x1

(E2)x3 Special Screw
TAPE 1

FF/REW Belt (F2)x1 FF/REW Clutch Ass'y FF/REW Belt (G2)x1 Main Belt (F1)x1

Motor Bracket

Tape Motor
Figure 7-4 �7�

Figure 7-5