SHARP CDC1H
Manual de Servicio

ASPM, summary operation

Hold down the ASPM button for 3 more second.

Preset CH memory full over? No operate. After displayed �END�. Return to previous station. No Yes Preset CH memory become full over? Begin to scan start 87.50 � 108.00 MHz

Displayed the TTL quantity of memo�ASPM� blinks in the display. rized stations by ASPM operation on this time. And return to the previous receiving freq. automatically. Yes

No SD (TUNE) DET out OK? Begin to ASPM SCAN from the next No effect

No Pass

Yes CH-SPAN again.

If count 1st OK? No effect

No Pass

Yes Repeat and continue with same format ASPM operation untill 108 MHz. No effect TTL quantity of memorized stations. And return to the previous receiving No effect Effect Memorized to the lowest PI cord Comparing freg. same or not?

� 17 � No effect signal. Is receiving signal No preset memory ahead of this receiving Yes and (already) previously memorized Yes No effect frequency.

If count 2nd OK? After reached 108 MHz, displayed the

No Pass

Yes

RDS signal or not? PI�identify

No freq. automatically. Pass

Yes

No

PI and between current receiving frequency vacant preset channel. before PI which is already and (already) previously memorized by ASPM on this time. frequency.

Yes

Compare the field strength of current

No No effect

CD-C1H/CP-C1H

stronger than signal which has same PI cord and is already memorized to Comparing freg. same or not? Memorized to the lowest time? Between current receiving frequency vacant preset channel.