PHILIPS CCZ252AT
Manual de Usuario

CCZ252comb.QX33

4/6/99 8:50 PM

Page 45

Automatic Operation Features 45
The following playback features will always operate.

Automatic Playback
When you put a tape in the TV/VCR, the power will come on automatically. If the tape�s record tab is missing, playback will begin. If a timer recording is set, the power will not come on automatically when you insert a tape with the record tab intact. If a timer recording is set and the TV/VCR power is off, the TV/VCR will eject the tape if the record tab is missing.

Automatic Rewind, Eject, Off
When a tape is played, fast forwarded, or recorded to its end, the TV/VCR will rewind the tape, stop, turn itself off, and eject the tape. If a real-time counter memory is set, the TV/VCR will only rewind the tape to the point at which the counter was set to zero, then stop. The TV/VCR will not turn itself off or eject the tape.

Memory Rewind, Power Off
When the POWER button is pressed while the TV/VCR is rewinding a tape, REW ¡ POWER OFF will appear on-screen. The TV/VCR will turn itself off when the tape has finished rewinding. If a real-time counter memory is set, the TV/VCR may only rewind the tape to the point at which the counter was set to zero, then turn itself off.

Tape Eject
A tape can be ejected with the TV/VCR power on or off (but the TV/VCR must be plugged in). If a timer recording is programmed, a tape can not be ejected when the power is off. Turn on the TV/VCR power, then eject the tape. Be sure to insert a tape and turn off the TV/VCR power for the timer recording.

Automatic Tracking Adjustment
The TV/VCR automatically adjusts the tracking to give you the best possible picture quality. With some recordings, however, you may get a better picture using the manual tracking controls (see below).

Manual Tracking
To adjust the tracking manually, press the CHANNEL o/p buttons on the TV/VCR or the TRACKING o/p buttons on the remote control. Tracking returns to Automatic Tracking Adjustment when a tape is inserted or when the STOP/p button is pressed.

Before Tracking Adjustment

After Tracking Adjustment