|
No hay comentarios de productos.
4 Turn the SEL/PUSH EXEC dial to select
the desired character, then press the dial.
TITLE SET P1 STBY S_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ABCDE 1 2 3 4 5 FGHIJ 6 7 8 9 0 KLMNO ����� PQRST ����� UVWXY ����� Z& ? ! ���ç� � . , / � ����� [TITLE] : END $ ¥DM£ ¿iø�: [C] [ cP2 ] [O K]
[POSITION] (position) You can select from 8 to 9 choices.
4
Turn the SEL/PUSH EXEC dial to select [OK], then press the dial.
The title appears.
To erase a character: Select [C]. To enter a space: Select [Z& ? !], then select the blank part between & and ?. To select alphabet and Russian characters: Select [ ]. 5 Turn the SEL/PUSH EXEC dial to select the next character, and enter the character in the same manner. 6 When you have finished entering characters, turn the SEL/PUSH EXEC dial to select [O K], then press the dial. The title is stored in memory.
5 6
Press REC START/STOP. Press TITLE at the scene you want to erase the title off.
To superimpose the title while you are recording
Press TITLE and carry out steps 2 to 4. When you press the SEL/PUSH EXEC dial at step 4, the title is recorded.
b Notes � If you display the menu while superimposing a title, the title is not recorded while the menu is displayed. � When you are selecting and setting the title, the title displayed on the screen is not recorded. � When you superimpose a title while you are recording, the beep does not sound. � When you are using your camcorder on the battery pack and do not operate it for 5 minutes, the power automatically goes off as the default setting. If you may take 5 minutes or longer to enter characters, set [A.SHUT OFF] in the (OTHERS) menu to [NEVER] (p. 59). The power will not to be turn off. Even though the power goes off, the characters you have entered remain stored in memory. Turn the power back on, then start again from step 1 to continue superimposing the title. � For TRV128/228/328/428: The date and time, or either of them, may not be displayed depending on the size or position of the title. z Tip � To change a created title, select the title in step 1, then press the SEL/PUSH EXEC dial. Then reselect the characters again.
2
Turn the SEL/PUSH EXEC dial to select the title you want to insert, then press the dial.
To insert an original title, turn the SEL/ PUSH EXEC dial to select [CUSTOM1��] or [CUSTOM2��], and press the dial, then select [OK] and press the dial.
3
Change [COLOR], [SIZE], or [POSITION] as necessary.
1 Turn the SEL/PUSH EXEC dial to select
[COLOR], [SIZE], or [POSITION], then press the dial. The selected item appears on the screen. 2 Turn the SEL/PUSH EXEC dial to select the desired item, then press the dial. 3 Repeat steps 1 and 2 until the title is laid out as desired. [COLOR] (color) [WHITE] y [YELLOW] y [VIOLET] y [RED] y [CYAN] y [GREEN] y [BLUE] [SIZE] (size) [SMALL] y [LARGE] (You can only select [SMALL] when you are entering more than 13 characters.)
32
Recording
|
