One-Touch Recording 31
The One-Touch Recording (OTR) function allows you to program an immediate timed recording from 30 minutes to eight hours long without setting the timer. Before you begin, make sure: q Channels are set up. q There is a tape in the TV/VCR. The record tab must be intact.
4 2 3
Press the STOP/EJECT button on the TV/VCR to stop the OTR.
POWER EJECT
1
Press the COMBI button, then use the CH(annel) m/n n button or the Number buttons to select the channel you want to record.
SLEEP/WAKE UP
SPEED
MEMORY
REC/OTR
PAUSE/STILL
2
PLAY REW STOP F.FWD
MENU
STATUS/EXIT
CLEAR
Press the SPEED button until the desired recording speed (SP or SLP) appears on the screen. Details are on page 30.
3
1 4 7
FM
CABLE/DBS
2 5 8 0
COMBI
3
CH.
1
6 9
SURF
Press the REC(ord)/OTR button repeatedly until the desired recording length appears in the upper right corner of the screen. Recording will begin immediately. The REC(ord) light will appear.
OTR CH12 LENGTH 0:30
VOL.
VAR.SLOW
VCR PLUS+ /ENTER
MUTE
TRACKING
F.ADV
SLOW
SMART SKIP INDEX PICTURE SOUND SEARCH SEARCH
LENGTH : PRESS OTR CANCEL : PRESS CLEAR
4
To stop an OTR before recording is finished, press the STOP/EJECT button on the TV/VCR. Or, press the REC(ord)/OTR button, then press the CLEAR button, then press the STOP/w button on the remote control.
� To check the time remaining for an OTR after the OTR has been set, press the STATUS/EXIT button. � To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired recording length appears on the screen. � You can not pause an OTR. � To cancel an OTR but continue recording, press the REC(ord)/OTR button, then press the CLEAR button. � You cannot record if DEFEAT RECORDING is set to ON. Details are on page 33. � You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the tape. � If the end of the tape is reached during an OTR, the TV/VCR will eject the tape and turn itself off.
