INSTALLATION
POSITION
Place the appliance horizontally on a firm surface, resting on all four wheels. The room should be dry and adequately ventilated. If the room temperature exceeds 43°C, or falls below 18°C, the appliance will not function as it should. Do not place the appliance close to sources of heat, radiators, chimneys, etc., and do not place the appliance in direct sunlight. If the appliance has been handled standing on end it should be allowed to stand in normal position for about 12 hours before switching it on. Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.
ELECTRICAL REQUIREMENTS
Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate, located on the backside of the appliance. WARNING: This appliance must be earthed.
SWITCHING ON
Before switching on, the appliance should be cleaned inside. See under �Maintenance�.
FITTING WHEELS
The wheels are fitted as shown in the drawing, using the enclosed fitting key.
