30 One-Touch Recording
A One-Touch Recording (OTR) is an immediate timed recording from 30 minutes to eight hours long. Before you begin, make sure: q Channels are set. Details are on page 10. q A tape is in the TV/VCR. The record tab must be intact.
4
Press the STOP/EJECT button on the TV/VCR to stop the OTR.
EJECT POWER
Use the CH(annel) o/p buttons or the Number buttons to select the channel you want to record.
1
MENU
1 4 7
STATUS/EXIT
2 5 8 0
CLEAR
3 6 9
2
Press the SPEED button until the desired recording speed (SP or SLP) appears on the screen. Details are on page 29.
1
SLEEP/ WAKE UP
ALT.CH
3
PAUSE /STILL
REC /OTR
PLAY REW F.FWD
3
Press the REC(ord)/OTR button repeatedly until the desired recording length appears in the upper right corner of the screen. Recording will begin immediately. The Record light will appear.
OTR CH12 LENGTH 0:30
TRACKING CH.
STOP
VOL. MUTE
SPEED
2
MEMORY
LENGTH : PRESS OTR CANCEL : PRESS CLEAR
4
To stop an OTR before recording is finished, press the STOP/EJECT button on the TV/VCR. Or, press the REC(ord)/OTR button, then press the CLEAR button, then press the STOP/w button on the remote control. If the end of a tape is reached during an OTR, recording will stop. The TV/VCR will turn itself off and eject the tape. The Record light will flash rapidly. The TV/VCR will turn off at the end of the OTR.
Helpful Hints
� To check the time remaining for an OTR, press the STATUS/EXIT button. � To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired recording length appears on the screen. You can not pause an OTR. To cancel an OTR but continue recording, press the REC(ord)/OTR button, then press the CLEAR button. You cannot record if DEFEAT RECORDING is ON. Details are on page 36. You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the tape.
