PIONEER C-AX10/KU/CA
Manual de Servicio

C-AX10

When the front flip-down door is opened

0-=

~ !@ # $

DOLBY
DIGITAL

%^ &*()_ + ¡ �

% CHARACTER INPUT buttonV This button is used to enter the Character Input mode for changing the input signal or sound memory setting to a user-selected name. ^ Digital REC Selector button (REC SELECTOR [DIGITAL] )V This button is used to enter the mode for selecting the REC OUT signal that is output from the digital output jack. & INPUT GAIN buttonV This button is used to enter the mode for adjusting the analogue input and digital input gain. * PARAMETER CHECK buttonV This button is used to enter the mode for checking the current settings. ( Tone Control button (TONE)V This button is used to enter Tone Control mode. ) Tone Control Channel button (EACH/ALL)V This button is used to switch between EACH mode and ALL mode. ÷ EACH mode : The front, centre, and surround channels can each be set individually. ÷ ALL mode : The front, centre, and surround channels are set to the same settings.

_ Balance Control button (BALANCE) V This button is used to enter the mode for adjusting the balance of the front left and right channels. + SYSTEM SET UP buttonV This button is used to enter System Setup mode for speaker setup or selecting modes. ¡ NETWORK SET UP buttonV This button is used to enter Network Setup mode when the OUTPUT MODE selector (�) is set to Digital Network FIR mode or Digital Network IIR mode. � OUTPUT MODE selector This selector is used to set to one of the following four modes. ÷ Digital Network FIR mode ÷ Digital Network IIR mode ÷ Normal mode ÷ OFF (Output off)

V After pressing the buttons in % to ¡, use the MULTI CONTROL jog dial 8 to make the settings and adjustments.

114