No hay comentarios de productos.
English
Playing Back Video CDs/SVCDs
Selecting Video Out
To playback images correctly on your TV, select the video out according to your TV system, select the proper video out using the buttons on the Unit before you play a disc.
3
Press 0 e to close the tray.
"CD CLOSE" appears on the display.
1 At standby mode. 2 Press disc number r, 1 button for
more than 2 sec.
CD3 CD2
4
Repeat steps 1 to 3 to insert other discs onto the other trays.
To continue putting discs onto other trays, even if a tray is open, by pressing the 0 e button of another disc tray, the open tray will close automatically, and the new disc will slide out.
CD3 ............ for NTSC exclusive TV. CD2 ............ for Multisystem TV. CD1 Multi detects the formula of the disc (NTSC/PAL) automatically and plays the image on the screen correctly. CD1 ............ for PAL exclusive TV.
When you place a CD onto the currently selected tray, whose disc number shown on the CD indicator, reading of the CD starts.After the reading is completed, the total number of tracks and total playing time will appear, then the playing time of the first track.
\
READING NOW Total number of tracks and playing time
\
Playing time of the 1st track
� Select the video output mode before you play the disc. � When you play an NTSC disc in MULTI mode on a PAL exclusive TV, the image may be distorted. If this happens, change the mode to PAL. � When you play an NTSC disc in MULTI mode on a Multisystem TV, the image may blink for a moment. This symptom is caused by the Unit detecting the formula of the disc, not by a malfunction of the unit. � Only on standby mode.
If you place a video CD, "VIDEO CD" will appear before the playing time of the first track. If the video CD has the Playback Control function,"VCD PBC" will appear. To put an 8 cm CD onto a tray, insert it so that it is aligned with the groove in the tray's center. If a tray is open when the System switches to the standby mode, the tray will close automatically.
Playing a Video CD
You can play video CDs either with or without the PBC function.
Placing CDs
1 Press 0 e on the CD Player you want to insert the 1
disc onto the tray.
"CD OPEN" appears on the display and the disc tray slides out.
Turn on the TV and select the video input so that you can view the pictures from the CD player.
Refer also to the manual supplied for your TV.
Compu Play
When 0 e is pressed while the power is on standby, the power is automatically turned on.
2 3
Prepare a CD.
Refer to "Placing CDs" in this page.
Start playback of the CD
Press CD 6 y, _ to start playback of the currently selected CD, or press CD 1-3 r, 1 to select the disc and start play. When you play a Video CD, "VIDEO CD" appears on the display. When you play a Super VCD, "SVCD" appears on the display.
2 Place a CD, with its label side up, onto the tray.
ATTENTION: To avoid malfunctions when you play a CD , set the CD in the right place at the center of the tray.
Compu Play When CD 6 y, _ or press CD 1-3 r, 1 is pressed while the power is on standby, the power is automatically turned on.
CORRECT INCORRECT To stop during play, pressed 7 z, +. To stop play and remove the disc, press 0 e for the disc being played.
13
Continued
EN6-17;MX-J777V/PM6
13
7/8/99, 9:16 AM
