JVC CA-MXJ75RE
Manual de Usuario

English

ZZZ ...

4 Set the on-time you want the unit
to turn on.
1) Press 4 or ¢ to set the hour, then press SET. 2) Press 4 or ¢ to set the minute, then press SET. �OFF TIME� appears for 2 seconds, then the unit enters off-time setting mode.

PRESET

Using Sleep Timer
With Sleep Timer, you can fall asleep to music. You can set Sleep Timer when the unit is turned on.

SEA CONTROL SET

How Sleep Timer actually works
The unit automatically turns off after the specified time length passes.

5 Set the off-time you want the unit
to turn off (on standby).
1) Press 4 or ¢ to set the hour, then press SET. 2) Press 4 or ¢ to set the minute, then press SET. The unit enters preset station selecting mode.

PRESET

On the remote control ONLY:

SLEEP

1 Press SLEEP.
SEA CONTROL SET

The time length until the shut-off time appears and the SLEEP indicator starts flashing on the display. � Each time you press the button, the time length changes as follows:
10 20 30 60 90 120 Canceled

6 Select the preset station.
1) Press 4 or ¢ to select the band (�TUNER FM� or �TUNER AM�), then press SET. 2) Press 4 or ¢ to select a preset channel number, then press SET. The REC indicator stops flashing and remains lit. The settings you have done are shown on the display in sequence.

PRESET

2 Wait for about 5 seconds after specifying the
time length.
The SLEEP indicator stops flashing and remains lit. To check the remaining time until the shut-off time, press SLEEP once so that the remaining time until the shut-off time appears for about 5 seconds. To change the shut-off time, press SLEEP repeatedly until the desired time length appears on the display.

SEA CONTROL SET

STANDBY

7 Press

to turn off the unit (on standby) if necessary.

To cancel the setting, press SLEEP repeatedly so that the SLEEP indicator goes off. � Sleep Timer is also canceled when you turn off the unit.

If you want to listen to another source while recording Press REC START/STOP to stop recording. Without stopping it, you cannot change the source.

Timer Priority
Since each timer can be set separately, you may wonder what happens if the setting for these timers overlaps. Here are examples. � Recording Timer has priority over Daily Timer and Sleep Timer. If Daily Timer is set to come on while Recording Timer is operating, Daily Timer will not come on at all.
6:00 6:30 7:00 7:30

To turn on or off Recording Timer after its setting is done
1 Press TIMER/CLOCK repeatedly until �REC� appears on the display. 2 To turn off the Recording Timer, press CANCEL. The REC indicator goes off from the display. The Recording Timer is canceled, but the setting for the Recording Timer remains in memory. To turn on the Recording Timer, press SET. The REC indicator lights up on the display. The settings you have done are shown on the display in sequence for your confirmation.
TIMER /CLOCK

DEMO CANCEL

Recording Timer Daily Timer does not work.
SEA CONTROL SET

If Recording Timer is set to come on while Sleep Timer is operating, Sleep Timer will not work (the SLEEP indicator does not go off).
6:00 6:30 7:00 7:30

Recording Timer Sleep Timer does not work.

� 27 �