MICROPHONE MIXING
Connect a microphone with a mini plug to the MIC jack and play a source to be mixed.
To record the microphone mixing sound, insert a tape in deck 1 and press w. � During dubbing at high speed, the microphone mixing sound is not recorded. MIC VOL � Adjusts the microphone volume. If a howling sound is produced, turn the volume down. � To prevent howling, hold the microphone away from the speakers. The use of unidirectional type microphones is also recommended.
DUBBING A TAPE
1 2 3 4 5
Press TAPE/POWER/6STANDBY to turn the power off. Insert a tape to be recorded on into deck 1 with the side to be recorded facing out. Insert a tape to be played into deck 2 with the side to be played facing out. Press a then press w on deck 1 to enter recording pause mode.
The power is turned on. c is pressed simultaneously.
En
Press DUBB SPEED HIGH/LOW to select a dubbing speed.
The HIGH-SPEED DUBBING indicator lights up: Dubs at high speed. The HIGH-SPEED DUBBING indicator goes off: Dubs at normal speed.
6
Press c on deck 2.
a on deck 1 is released and recording starts.
To stop recording, press Z on deck 1 and deck 2. The power will be automatically turned off.
NOTE
When recording near a television, noise may be recorded. Move the unit away from the television.
To prevent accidental erasure
Break off the plastic tabs on the cassette tape with a screwdriver or other pointed tool after recording.
To record on the tape again
Cover the tab openings with adhesive tape, etc. Side A
