HUSQVARNA CA150
Manual de Usuario

ASSEMBLY
Fitting the bevel gear
� Guide the guard B onto the shaft so that the hole in the guard aligns with the hole in the bracket. Tighten the screws C.

�

Assembling the angle gear on the shaft. Turn the shaft so that the splines on the drive axle mate in the angle gear.

B

4xC

�

Align the bracket with guard so that it sits straight in relation to the tines.

�

First tighten the screw H and then the screw M.

M

�

Tighten the screws F.

H

Assembling the guard.
� Remove the four screws C and the two screws F from the bracket A.

F

A C

�

Place the rubber sleeve D on the shaft E. The rubber sleeve should sit between the arrow markings on the shaft.

E

D

�

Place the bracket A around the rubber sleeve and �t the screws F loosely.
F A

A

8 � English