|
No hay comentarios de productos.
SECTION 2 DISASSEMBLY
Note : Follow the disassembly procedure in the numerical order given.
2-3. AMP BOARD
2-1. CASE ASSY, MICROPHONE
7 Two screws (+PTPWH 2 � 5)
3 Remove soldering 6 Remove the two solderings and remove the harness.
A 4 Screw 1 Ring, screw Turn the Ring, screw in the direction of the arrow A, and remove it. 3 Screw 2 Grip
1 Remove soldering 5 Remove three solderings and remove the three harnesses.
8 AMP board
9 Transformer, output
2 Terminal, minus
5 Case assy, microphone
4 Terminal, plus
2-2. CHASSIS, �SLEEVE, CONNECTOR�
Note: To re-attach it, turn the PAD knob first in the direction of the arrow and attach it. 3 Screw (+P 2 � 6)
4 Terminal, ground 1 Two screws 2 Two screws
5 Chassis
6 Screw (+K 2 � 5)
8 Sleeve, connector
7 Two screws (+K 2 � 5)
�3�
�4�
|
