SONY BVP-9500WS
Manual de Servicio

1-6. Replacing Function Switches

6. Remove the screw to remove the SW-1008 board with switch bracket installed. 7. Disconnect the harness connectors from the CN1 and CN2 connectors on the SW-1008 board.
Precision P2.6 x 5 CN1 Switch bracket

CN2 SW-1008 board

8. Remove the seven nuts, seven washers, one spacer and one nut, and remove the SW-1008 board from the switch bracket. 9. Desolder a switch or control that needs to be replaced.
SW-1008 board Switch bracket

Washers Nuts

Washers Nut Spacer Nuts

BVP-9500WS/9500WSP MM

1-29 (E)