1-6. Cleaning
1-6-1. Cleaning of Viewfinder
By extracting VF tube sub assy, lens and MC protector can be easily cleaned. And also dust on the CRT surface or mirror can be easily cleaned off. 1. Turn the hold ring to the left and extract the VF tube sub assy. 2. Detach the eyecup. 3. Remove the MC protector with the filter holder. 4. Clean the lens and MC protector with a commercially available camera lens cleaner. Blow off dust with a blower carefully so as not to flaw the mirror. 5. After the cleaning is completed, install by reversing the preceding steps. Align red lines of the VF tube and VF tube sub assy when inserting, and turn the hold ring to the right until it locks. m . Do not use any type of solvent, such as alcohol, benzine or thinner to remove stains. . Be sure to attach the eyecup to the VF, or the MC protector may come off. . To protect the viewfinder lens from drops, put the MC protector in the filter holder and attach the eyecup securely.
1-6-2. Cares After Using at Special Environment
It is recommended to check the following items after gathering the news at seaside, dust area or spa. 1. Clean off sand and other dust in the unit carefully. 2. Do not allow salt in seawater or sulfur in spa to contact a not-painted surface of the cabinet. They may cause to corrode. Clean with alcohol immediately if contacted. 3. Clean the connection surface of connectors. 4. Carry out the common operation check and check that the unit normally operates.
