1-3. Installation of BKP-7311
1. Disconnect the power cord from the rear panel of CCU-700A. Loosen the two screws(M4 x 20) and remove the front panel. 2. Push and turn the eject levers to unlock and pull out all the plug-in boards from the unit.
Unlock Unlock
4. Remove the six screws(B3 x 5) and open the rear panel. Disconnect CN3 connected to the rear panel.
Flexible card wire MB-563 board CN-3
Plug-in boards B3 x 5
Rear panel B3 x 5 Front panel B3 x 5
3. Loosen the four screws(PWH4 x 10) fixing the power unit and remove the power unit while pushing the power unit forward at the fan in the rear of the unit.
5. Install the three coaxial cables into the supplied harness guide.
