SONY BKP-5973
Manual de Servicio

2-3. Disconnecting/Connecting of Flexible Card Wire

Connecting m Be careful not to insert the flexible card wire obliquely. Check that the conductive surface of the flexible card wire is not soiled with dust. CP-295 board side 1. Slide the portions B in the direction of the arrow and insert the flexible card wire as far as it will go into the connecter with the conductive surface of the wire faced as shown in the figure. 2. Slide the portions B in the opposite direction of the arrow to lock.

Conductive surface B

3. Route the flexible card wire around the lead pin as shown in the figure.
Front panel

S24 CP-295 board

S25

CN1 Lead pin Frexible card wire

AU-236 board side 1. Slide the portions A in the direction of the arrow and insert the flexible card wire as far as it will go into the connecter with the conductive surface of the wire down. 2. Slide the portions A in the opposite direction of the arrow to lock.
A Conductive surface

BKP-5973

2-3 (E)