SONY BKP-5971
Manual de Servicio

1-2. Installation

6. Remove the two (B3 X 8) screws securing the conventional MPX filter. 7. Place the supplied cushion on the MPX filter of the BKP-5971 and secure it to the board rail using the screws that were removed in Step 6. Insert the board rail in the CA-550/550P in the reverse procedures of Step 5.

9. Secure the DM-99 board with the supplied three screws (B3 X 4).
B3 X 4 B3 X 4 DM-99

Cushion

MPX filter

Spacer

Spacer

10. Connect the coaxial cable (green) to CN2 on the DM-99 board.
Board rail DM-99

B3 X 8

CN2(green)

8. Connect the four coaxial cables extending from the MPX filter (black, blue, red, and white). Arrange the cables as shown in the figure.

Bosses

MB-605

CN7(red) CN6(black) CN8(blue) CN2(white) DM-98

BKP-5971

1-3 (E)