<Cause> The thermistor is abnormal. <Suspected Parts> Thermistor <Corrective Action> Replace the logic board.
8.Waste Ink-Full Warning/Error
<Corrective Action>
Visual check of the waste ink absorber
<Cause> The waste ink absorbers� estimated waste ink amount
has reached 95% (Warning) or 100% (Error). <Suspected Parts> Waste ink absorbers, logic board
� Check to see how much ink the waste ink absorber has absorbed. (Check the rate of ink penetration for the entire waste ink absorber as a guideline to determine the waste ink counter setting value.) No 1. Reset the waste ink amount in the EEPROM. 2. Replace the logic board. 0% (clear), 25%, 50% or 75% (See Part 3 �3.4 Service Mode.)
Waste ink absorbed is 75 % or more of the limit ? Yes
Replace the waste ink absorber. END
� Clear the total of the waste ink amount saved in the EEPROM.
