Set your document in one of the following ways:
� In the ADF Carefully insert the document stack face-down into the ADF until the display changes to �Dial number�. � Make sure this message appears. If it does not, your document will not be scanned from the ADF. � Lift the platen cover 1 then place the first page of your document face-down on the exposure glass aligning it with the arrow mark on the scale 2. Then close the platen cover 3.
Dial number
1
3
2
Dial/Set orig.
4
Adjust the scan settings if necessary.
� E.g. if your document is a photograph, press the Original Type Select key twice to select Photo 1.
Setting [Text] [Text Fine] [Photo1] [Photo2]
Use for: Standard text Detail text Photographs Mixed text and photographs
To select the Resolution/Photo setting, see page 76.
