CASIO BG1000WF-4T
Manual de Usuario

Module No.1565/1965
GENERAL GUIDE
� If the contents of the display seem to be continually changing, see �AUTO DISPLAY FUNCTION� for information on how to stop it. � Press C to change from mode to mode. Timekeeping Mode Day of The Week Display Time Graph Display Telememo Mode Alarm Mode

1565/1965-1

Stopwatch Mode

Press D
-

TIMEKEEPING MODE
Month � Date Day of week

� In the Timekeeping Mode, press B to activate the EL backlight and display animated graphics for about 3 seconds. � Press D in the Timekeeping Mode to switch between the 12-hour and 24-hour formats. With the 12-hour format, the display shows the mark along with the current day of the week. With the 24-hour format, the display shows a time graph for the current date. � There are three different time graph formats that change automatically in accordance with the current relationship between an alarm time setting and the current time.

5. After you set the time and date, press A to return to the Timekeeping Mode. � The day of week is automatically set in accordance with the date. � The date can be set within the range of January 1, 1995 to December 31, 2039. � If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Timekeeping Mode automatically.

About the backlight
In the Timekeeping Mode, press B to illuminate the display for about 3 seconds. � The backlight of the watch employs an electro-luminescent (EL) light, which loses illuminating power after very long use. � The illumination provided by the backlight may be hard to see when viewed under direct sunlight. � The watch will emit an audible sound whenever the display is illuminated. This is caused by a transistor that vibrates when the EL panel lights up. It does not indicate malfunction of the watch. � The backlight automatically turns off whenever an alarm sounds.

Hour Seconds Minutes PM indicator

No Alarm Time Setting for Current Date
Month � Date Time graph

TELEMEMO MODE
Caution
The following causes all data stored in memory to be deleted. Be sure to always keep separate written copies of all important data. � Malfunction or repairs � Dead battery � Battery replacement In no event will CASIO be liable for loss of data or any damages arising out of such loss. The Telememo Mode lets you store up to 20 pages of name, telephone number, and cell phone (or pager) number data. You can recall data by scrolling through it on the display. � The number of unused pages still available for storage of data appears on the display every time you enter the Telememo Mode. � You can input up to eight characters in the text area, and 12 digits in each of the two (telephone and cell phone) number � areas. The data item on the display when you exit the Telememo Mode appears first the next time you enter the Telememo Mode.

Alarm Time Setting for Current Date
Appointment icon Time graph

An appointment icon appears on the display and the time graph hour for which the alarm is set flashes. The time graph shows how long before the alarm time will be

Appointment reached. time indicator

Mode indicator

Remaining memory Month � Date Name

Alarm Time Setting Within the Hour
Appointment icon Time graph Appointment time indicator

Telephone number

One hour before an alarm time is reached, a tone sounds and the time graph format changes, replacing the month and day with a countdown of the minutes and seconds left until the alarm time is reached.

[New Data Display]

To input new Telememo data

Remaining minutes and seconds

To set the time and date
1. Hold down A while in the Timekeeping Mode. The seconds digits flash on the display because they are selected. 2. Press C to change the selection in the following sequence.
Seconds Hour Minutes Day Year Month

1. In the Telememo Mode, press D or B until the New data display appears. � The new data display is the one that is blank (contains no name and telephone number). � If there is no Telememo data stored in memory yet, the new data display appears as soon as you enter the Telememo Mode. � If the message � � appears on the display, it means that memory is full. To store more data, you will Number area first have to delete some of the data. 2. Hold down A and a cursor appears in the text area. 3. Use D or B to input a character at the cursor position. The character changes in the following sequence. Holding down either button changes the character at high speed.
Text area

Press (Space) Press 4. After you select the character you want, press C to advance the cursor to the right. � Repeat 3 and 4 until you complete name input. � You can input up to 8 characters in the name area. 5. After the name input is through, use C to move the cursor to the telephone number area. 6. While the cursor is in the telephone number area, use B or D to input a number you want. The character changes in the following sequence. Holding down either button changes the character at high speed. Press � (Hyphen) 0 to 9 (Space) Press 7. After you select the character you want, press C to advance the cursor to the right. � Repeat 6 and 7 until you complete number input. A to Z 0 to 9

Animated Graphic

3. While the seconds digits are selected (flashing), press D to reset the seconds to 00. If you press D while the seconds count is in the range of 30 to 59, the seconds are reset to 00 and 1 is added to the minutes. If the seconds count is in the range of 00 to 29, the minutes count is unchanged. 4. While any other digits (besides seconds) are selected (flashing), press D to increase the number or B to decrease it. Holding down either button changes the current selection at high speed. � While the animated graphic is flashing, you can select one of the following graphics. The animated graphic you select appears on the display whenever you turn on the EL backlight in the Timekeeping Mode. [Module 1565] 1. Random selection of 2, 3, or 4. 2. DANCE 3. DJ 4. LOVE [Module 1965] 1. Random selection of 2, 3, or 4. 2. LOVERS A 3. LOVERS B 4. LOVERS C