ELECTRICAL CONNECTION
Important: do not connect to the power supply before you have finished connecting the oven and cooktop. � Warning: Make sure the appliance is installed and connected to the electricity supply by a qualified technician in accordance with the manufacturer�s instructions and in compliance with local regulations. The installer is responsible for the correct electrical connection of the appliances and the observance of the relative safety recommendations. � The appliance must be connected to the electricity supply by means of an all-pole disconnect switch with minimum contact gap of 3 mm. � The appliances must be earthed by law. � Do not use multiple plug adapters or extension leads. � After the oven has been installed, the electrical components must be concealed. � Make sure that the voltage shown on the rating plate is the same as the power supply voltage in your home. The rating plate is on the front edge of the oven cavity (visible with oven door open). � Attention: The maximum absorbed power of this appliance is 26 A. Connect the appliance to the mains accordingly. For Australia only: The oven is delivered without supply cord. Use a supply cord type H05 RR-F, 3 X 2,5 mm2 min. �
