If the system is unable to find a station offering the selected programme type, the display will show �NO PTY� and a beep tone will be released. The station received before starting seek tuning will be tuned in. You can assign different programme types to each preset position. Please refer to the next chapter �Storing programme types�. b) Using the << >> buttons of the rocker switch When PTY is switched on, you can select a programme type using buttons << >>. � Press << or >>; the programme type selected last will be displayed for three seconds. During this period press >> (forwards) or << (backwards) to select the desired type. Press << or >> as many times as required.
will be released. The station received before starting seek tuning will be tuned in. Storing programme types One programme type was assigned to each of the preset buttons 1-6 at the factory. If desired, you can also store other available programme types. To do so, make sure that �PTY� lights up in the display. � If necessary, press the PTY button to switch on the function. � � Select a programme type using buttons << >> and
PTY priority Situation: PTY is switched on and lights up in the display. No station offering the selected programme type can currently be received (with seek tuning or scan). The set will switch back to the previous station. As soon as a programme with such PTY can be received within the broadcasting network, the unit will switch over to the corresponding station for the duration of the programme. Example: German broadcasting network NDR: Station tuned in: NDR3. �PTY� lights up in the display. Programme type �POP� selected. Seek tuning is started. The display alternately shows �SEARCH� and �POP�. No station with PTY-POP can be found. The display shows �NO PTY� and automatically switches back to NDR3.
�
hold down the desired preset button (1-6) until you hear a beep. Now the selected programme type can be recalled by pressing this preset. For this the PTY function must be active. Scanning stations with PTY-SCAN Condition: �PTY� must appear in the display. � Press the SC button. All received stations offering the selected programme types will be scanned. To switch off PTY-SCAN: � Press SC once again.
�
If you wish to listen to a station offering the selected PTY, press / to start seek tuning operation. If the system is unable to find a station offering the selected programme type, the display will show �NO PTY� and a beep tone �
