AMU B-3
Manual de Usuario

Programming Tutorial Editing Presets

To Change the Instrument for any Layer in the Preset
6. 7.

Move the cursor back up to the �rst �eld in the �rst line (the layer). Use the Data Entry Control to select the layer you want.

L2

INSTRUMENT

ROM:B3

0104 org: 1 6� D i r e c t Fb
8.

Repeat steps 3 and 4 for each selected layer. Find an instrument that sounds good when combined with the previous instruments selected.

With all these great instruments to work with, you really can�t go wrong. Now let�s play with the tuning.

Changing the Tuning of an Instrument

Tuning the selected layer of the preset changes the pitch of the key on the controller. If the numbers are �00,� it means that the instruments are tuned to concert pitch (A=440 Hz). The Coarse tuning value represents whole semitone intervals. The Fine tuning value shifts the pitch in 1/64 semitones (or 1.56 cents).

To Tune the Instrument of the Current Layer
1.

Scroll through the Edit menu until you come to the Tuning page.

L1

TUNING Coarse: +36 Fine: +6

2. 3.

Move the cursor to the Coarse �eld (using the cursor button). Set the value to +12 to shift the pitch up a whole octave. To shift the pitch in smaller units than a semitone, use the Fine �eld.

Try tuning one of the instruments to a perfect �fth above the other by setting the Coarse value to +7. Tuning an instrument far out of its normal range completely changes the character of the sound. For example, if you tune a bass guitar up 2 octaves, it's going to sound rather petite. On the other hand, if you tune it down 2 octaves, you can probably rattle plaster off the walls! Experiment with radical pitch shifting. You'll be surprised at the results.

130 E-MU Systems