CD PLAYER
Searching for a passage within a track You can search for a passage within a track. The CD is played at low volume and at high speed, however, the sound is still recognizable. 1. Keep the � SEARCH or SEARCH § button pressed during playback, and release the button as soon as you recognize the required passage: � Normal CD playback will resume from this point.
SHUFFLE/REPEAT
The MODE button allows you to select four different modes. The modes can be selected or changed during playback. 1. During playback only, press MODE until the desired function appears on the display. REPEAT - Continuous playback of the current track. SHUFFLE - Tracks are played in random order. REPEAT ALL, SHUFFLE - Continuous playback of tracks in random order. REPEAT ALL - Repeats the entire CD. � During playback you can use � SEARCH or SEARCH § to skip tracks. 2. To leave the SHUFFLE mode, press the MODE button repeatedly until the various SHUFFLE/REPEAT modes are no longer shown on the display. You can also press STOP 9 to quit playback.
REPEAT ALL
x4
REPEAT
x3
REPEAT ALL SHUFFLE
x2
SHUFFLE
x1
PROGRAMMING TRACK NUMBERS
You may store at most 20 tracks in the memory in the desired sequence. You may store any track more than once. Programming track numbers 1. In the stop position select the desired track using � SEARCH or SEARCH § until the display shows the desired track number.
PLAY
RECORD
P
SHUFFL
E
SEARCH
2. Store the desired track by pressing MODE once. � The display shows P and PROGRAM followed by your selected track number. 3 Select and store all desired tracks of a CD in this way.
Checking a program 1. To review the set program, in the stop position press and hold MODE for more than 2 seconds. � The display will show the track numbers you have selected in sequence. 2. To start playback of the program, press PLAY�PAUSE 2;. � Playback starts with the first track of the program. After the last track, playback stops and the display shows the CD�s total number of tracks.
