PHILIPS AZ1110/17
Manual de Usuario

AZ 1110 - Family CD Radio Cassette Recorder

Return your Warranty Registration card today to ensure you receive all the benefits you�re entitled to.
� Once your Philips Magnavox purchase is registered, you�re eligible to receive all the privileges of owning a Philips Magnavox product. � So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits.

POWER SUPPLY
BATTERIES (see 1) Whenever convenient, use the power supply if you want to conserve battery life. Make sure you remove the power plug from the set and wall outlet before inserting batteries. Batteries (optional) 1. Open the battery compartment and insert as AC POWER 1. Check if the power voltage as shown on the type plate (on the bottom of the set) corresponds to your local power voltage. If it does not, consult your dealer or service organisation. 2. If your set is equipped with a voltage selector, adjust it so that it matches with the local power voltage 3. Connect the power cord to the AC MAINS outlet and the wall outlet. � The set is now ready to use. 4. To switch off the AC power supply completely, pull the power plug out of the wall outlet. � Disconnect the power cord when you change over to battery supply, or to protect the set during heavy thunderstorms.

CASSETTE RECORDER
CASSETTE PLAYBACK 1. Set the source selector to TAPE. 2. Press STOP�OPEN 9 / to open the cassette holder. 3. Insert a recorded cassette. 4. Press PLAY 1 and playback will start. 5. Adjust the sound using the VOLUME, and DBB controls. 6. For brief interruptions, press PAUSE ;. Press PAUSE ; again to resume playback. 7. By pressing 5 or 6, fast winding of the tape is possible in both directions. 8. To stop playback, press STOP�OPEN 9 /. � The keys are automatically released at the end of the tape. 9. Set the source selector to TAPE/POWER OFF position (with the cassette keys released) to switch off the set. CASSETTE RECORDING (see 6 / 7 ) RECORDING FROM THE RADIO 1. Set the source selector to RADIO. 2. Tune to the desired radio station using the TUNING knob. 3. Press STOP�OPEN 9 / to open the cassette holder. 4. Insert a blank cassette. 5. Press RECORD 0 to start recording. 6. For brief interruptions, press PAUSE ;. To resume recording, press PAUSE ; again. 7. To stop, press STOP�OPEN 9 /. CD SYNCHRO START RECORDING 1. Set the source selector to CD. 2. Insert a CD and if desired, program track numbers. 3. Press STOP�OPEN 9 / to open the cassette holder. 4. Insert a blank cassette. 5. Press RECORD 0 to start recording. � Playing of the CD program starts automatically from the beginning of the program. It is not necessary to start the CD player separately. 6. For brief interruptions, press PAUSE ;. To resume recording, press PAUSE ; again. 7. To stop recording press STOP�OPEN 9 /. To select and record a particular passage within a track 1. Press SEARCH � or § to select a passage. 2. Put the CD player in PAUSE ; position at the selected passage. � Recording will start from this exact point when you press RECORD 0.

AZ 1110 Family CD Radio Cassette Recorder Warranty Verification
POWER ON �CD �RA �TAPE DIO POWER OF R F

Owner Confirmation
Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss.

Model Registration
Returning your Warranty Registration Card right away guarantees you�ll receive all the information and special offers which you qualify for as the owner of your model.

shown six batteries, type R20, or D-cells. 2. Replace the compartment door, making sure the

DB
DYNAMIC BOOST

B

OPEN

FM MW -

Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your Philips Magnavox warranty.
53 53

batteries are firmly and correctly in place. 3. Remove the batteries if exhausted or if they will not be used again for a long period. � The incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or cause the batteries to burst. Therefore: � Do not mix battery types, e.g. alkaline with zinc carbonate. � When inserting new batteries, replace all batteries at the same time.

FM 88 92 2

MW

108
MHz

96 65 0 100 0 83 10 4 0 10 830 4 1000 12
KHz z

PAUSE PA
STOP � OP EN

1600

00

Environmental information All redundant packaging material has been omitted. We have done our utmost to make the packaging easily separable into three mono materials: cardboard (box), expandable polystyrene (buffer) and polyethylene (bags, protective foam sheet). Your set consists of materials which can be recycled if dissassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. General information on cassette recording � Recording is permissible insofar as copyright or other rights of third parties are not infringed. � This deck is not suited for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. For recording you should use NORMAL type cassettes (IEC I) on which the tabs have not been broken. � The recording level is set automatically. Altering the VOLUME control or, DBB switch will not affect the recording in progress. � No recording will take place during the first 7 seconds, when the leader tape passes the recorder heads. � To prevent the accidental erasure of a recording, keep the cassette side to be safeguarded in front of you and break out the left tab. Recording on this side is no longer possible.

SEARCH

PLAY
PLAY�PAUSE

RECORD

SHUFFLE

Know these
SEAR SE CH MODE DE

STOP OP

safety symbols
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

For Customer Use Enter below the Serial the cabinet. Retain located on the rear of No. which is this information for future reference. Model No. _______________________ Serial No. ________________________

� Remove the batteries if the set is not be used for a long time. Note: The battery supply is switched off when the set is connected to the AC power supply.

t
Owner�s Manual Mode d�emploi Instructivo de manejo
PHILIPS CONSUMER ELECTRONICS COMPANY

This �bolt of lightning� indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The �exclamation point� calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.

WARNING: TO PREVENT
FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
Both the model and production numbers can be found on the bottom of the set.

CAUTION: To prevent electric
shock, match wide blade of plug to wide slot, and fully insert.

s
A Division of Philips Electronics North America Corporation Knoxville, Tennessee 37914-1810, U.S.A.
Printed in Hong Kong TCtext/CvB/747

MAC5097

SAFETY
1
6 x D-cells - R14

OPERATION/RADIO
GENERAL OPERATION 1. To switch on the set, use the source selector 2. Adjust the sound using the VOLUME control and DBB switch. 3. To switch off the set, set the source selector to TAPE/OFF position, with the cassette keys released. RADIO (see 2 / 3) 1. Set the source selector to RADIO. 2. Adjust the sound using the VOLUME control and the DBB switch. 3. Select the wave band using the FM-AM band selector. 4. Tune to a radio station using the TUNING knob. � For FM, pull out the telescopic antenna. To improve FM-reception, incline and turn the antenna. Reduce its length if the FM-signal is too strong (very close to a transmitter). � For AM, the set is provided with a built-in antenna, so the telescopic antenna is not needed. Direct the antenna by turning the whole set. 5. To switch off the set, set the source selector to TAPE/ POWER OFF position, with the cassette keys released.

CD PLAYER
CD DISPLAY INDICATION (see 4) � Total track number: in stop position. � Current track number: during CD play. � Current track number flashes: in PAUSE mode. � SHUFFLE/REPEAT mode: the respective mode is activated. � PROGRAM: program function is active, P also appears briefly when you store a track. � No: error in CD operation or with the CD, or no disc (see Troubleshooting). � F: Program memory full, when you try to store more then 20 tracks PLAYING A CD 1. Set the source selector to CD. 2. To open the CD compartment, press OPEN on the the CD door. 3. Insert the audio CD, printed side facing up. 4. To close the CD compartment, push the door down. � The CD player scans the contents of the CD and the total number of tracks is displayed 5. Press PLAY�PAUSE 2; to start playback. 6. Adjust the sound using the VOLUME control and the DBB switch. 7. To interrupt playback, press PLAY�PAUSE 2;. Press PLAY�PAUSE 2; again to continue playback. 8. Press STOP 9 to stop CD playback. 9. Set the source selector to TAPE/OFF position to switch off the set. Note: CD playback will also stop when: � the CD has reached the end; � the CD door is opened; � the source selector is in the RADIO or TAPE/OFF position.

MAINTENANCE
PRECAUTIONS & GENERAL MAINTENANCE (see 8 / 9) � Place the set on a hard, flat surface so that it does not tilt. � Do not expose the set, CDs, batteries or cassettes to humidity, rain, sand, direct sunlight or other places where high temperatures can occur, such as in the vicinity of heating apparatus or in motor cars parked in the sun. � Do not cover the set. The amplifier produces heat which must dissipate freely, so make sure that there is sufficient ventilation around the set. A minimum gap of 15 cm is necessary. � The mechanical parts of the CD player and the cassette deck contain self-lubricating bearings and must not be oiled or lubricated. � A chamois leather slightly moistened with water is sufficient for cleaning the housing. Do not use cleaning agents containing alcohol, spirits, ammonia or abrasives as these may harm the housing. CD MAINTENANCE � The lens of the CD player should never be touched. � The lens may cloud over if the CD player is moved from cold to warm surroundings. The CD player will not start. Give the player some time to acclimatise. � To take a CD out of its box, press the center spindle while lifting the CD. Always pick up the CD by the edge and replace the CD back in its box after use to avoid scratching and dust. � To clean the CD, wipe in a straight line from the center towards the edge using a soft, lint-free cloth. Do not use cleaning agents as they may damage the disc. � Never write on a CD or attach stickers to it. RECORDER MAINTENANCE (see 0) To ensure a good recording and playback quality, clean the indicated parts A,B and C after every 50 hours of operation or, on average, once a month. Use a cotton bud slightly moistened with alcohol or a special head cleaning fluid. � Press PLAY 1 and clean the rubber pressure roller C. � Then press PAUSE ; and clean the capstan B and the heads A. � After cleaning, press STOP�OPEN 9 /. Cleaning of the heads A can also be done by playing a cleaning cassette through once.

2
POWER �CD �RADIO �TAPE OFF ON

FM

3
POWER �CD �RADIO �TAPE OFF ON

AM

WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

ç Canada
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.

#

%

$
POWER DYNAMIC BOOST POWER DYNAMIC BOOST

DBB

DBB

OPEN

FM AM -

OPEN
FM AM -

FM 88 AM 92 530 96 650 100 104 830 108
MHz

FM 88 AM 92 530 96 650 100 830 104 1000

PAUSE
STOP � � OPEN

KHz

1000 1200 1600

PAUSE
STOP � OPEN

MHz

108
KHz

1200 1600

SEARCH

SEARCH

PLAY
PLAY�PAU SE

RECORD
PLAY�PAU SE

PLAY
RECORD

SHUFFLE

STOP SEARCH

SHUFFLE

STOP SEARCH

MODE

MODE

CAUTION
Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure.
x3

4
REPEAT ALL SHUFFLE

5
REPEAT ALL REPEAT

x4

REPEAT ALL

SHUFFLE

x2
SHUFFLE

The set complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10

PROGRAM

SAFETY INSTRUCTIONS � Read before operating equipment
x1

6

7

8

1
POWER �CD �RADIO �TAPE OFF ON POWER DYNAMIC BOOST

DBB

OPEN

FM AM -

108
MHz

FM 88 AM 92 530 96 650 100 830 104
KHz

!
PLAY�PAUS E

PAUSE
STOP � � OPEN

1000 1200 1600

SEARCH

PLAY

RECORD

SHUFFLE

STOP SEARCH

MODE

@ 1 2 3
PLAY�PAUSE
DYNAMIC BO OST

DBB

�C �RAD D �TAPE IO POWER OF F

9

POWER ON

0
OPEN
FM AM -

9
0

PAUSE PA
STOP � OPE N

108
MH z

10 4

FM 88 A 92 53 M 96 65 0 100 0 83
1000 1 60 1 20 0 0

KH

z

8 7
0

CLASS 1 LASER PRODUCT

SEARCH

PLAY AY

RECORD

4
SHUFFLE

STOP SEARCH

MODE

5 6

A

ABC

This product was designed and manufactured to meet 11. Grounding or strict quality and safety standards.There are, however, some Polarization - Precautions installation and operation precautions which you should be that should be taken so that AC particularly aware of. the grounding or polarization means of an Polarized 1. Read Instructions - All the safety and operating appliance is not defeated. Plug instructions should be read before the appliance is operated. To prevent electric shock, match the wide Do not use this (polarized) plug 2. Retain Instructions - The safety and operating thenfully inser t. blade of this plug to the wide slot, instructions should be retained for future reference. with an extension cord, receptacle or other outlet 3. Heed Warnings - All warnings on the appliance unless the blades can be fully inserted to prevent and in the operating instructions should be adhered blade exposure. to. 12. Power-Cord Protection - Power supply cords 4. Follow Instructions - All operating and use should be routed so that they are not likely to be instructions should be followed. walked on or pinched by items placed upon or 5. Water and Moisture - The appliance should not against them, paying particular attention to cords be used near water - for example, near a bathtub, and plugs, convenience receptacles, and the point washbowl, kitchen sink, laundry tub, in a wet where they exit from the appliance. basement or near a swimming pool, etc. 13. Cleaning - The appliance should be cleaned only 6. Carts and Stands - The appliance should be as recommended by the manufacturer. used only with a car t or stand that is recommended 14. Power Lines - An outdoor antenna should be by the manufacturer. located away from power lines. 6A. An appliance and car t combination 15. Nonuse Periods - The power cord of the applishould be moved with care. Quick stops, ance should be unplugged from the outlet when left excessive force, and uneven surfaces may unused for a long period of time. cause the appliance and car t combination 16. Object and Liquid Entry - Care should be taken to overturn. so that objects do not fall and liquids are not spilled 7. Wall or Ceiling Mounting - The appliance into the enclosure through openings. should be mounted to a wall or ceiling only as 17. Damage Requiring Service - The appliance recommended by the manufacturer. should be serviced by qualified service personnel 8. Ventilation - The appliance should be situated so that its location or position does not interfere with when: its proper ventilation. For example, the appliance A. The power-supply cord or the plug has been should not be situated on a bed, sofa, rug, or similar damaged; or surface that may block the ventilation openings; or, B. Objects have fallen, or liquid has spilled into the placed in a built-in installation, such as a bookcase appliance; or or cabinet that may impede the flow of air through C. The appliance has been exposed to rain; or the ventilation openings. D. The appliance does not appear to operate normally or exhibits a marked change in 9. Heat - The appliance should be situated away from performance; or heat sources such as radiators, heat registers, stoves, E. The appliance has been dropped, or the enclosure or other appliances (including amplifiers) that damaged. produce heat. 18. Servicing - The user should not attempt to ser vice 10. Power Sources - The appliance should be the appliance beyond that described in the operating connected to a power supply only of the type instructions. All other servicing should be referred to described in the operating instructions or as qualified service personnel. marked on the appliance.

CAUTION:

91/8

EL 4562-1

English
1 DBB (Dynamic Bass Boost) � to increase the bass level 2 VOLUME � to adjust the volume level 3 Cassette keys PAUSE ; STOP�OPEN 9 / SEARCH 5 SEARCH 6 PLAY 1 RECORD 0 4 CD buttons PLAY�PAUSE 2; STOP 9 SEARCH � § MODE 5 CD display 6 Cassette compartment 7 TUNING 8 Tuning dial pointer 9 Band selector 0 OPEN ! Source selector @p BACK PANEL # Telescopic antenna $ AC MAINS % Battery door � to improve FM reception � for power cord � to open the battery compartment � to select the wave band (FM-AM) � to open the CD door � POWER ON/OFF switch and to select the sound source: CD - RADIO - TAPE � 3.5 mm headphone socket � to tune to radio stations � to interrupt playback � to stop playback and open the cassette compartment � to fast forward the tape � to fast rewind the tape � to start playback � to start recording � to start or interrupt CD playback � to stop playback � to skip or search a passage or a track � to select a different playback mode e.g. to SHUFFLE or REPEAT and to program track numbers � to indicate CD functions

Français
pour amplifier les fréquences basses pour régler le niveau sonore Touches de la platine cassette pour interrompre la lecture pour interrompre la lecture et ouvrir le compartiment à cassette rembobinage rapide de la cassette vers l'avant rembobinage rapide de la cassette vers l'arrière pour démarrer la lecture pour démarrer l'enregistrement Touches du lecteur de CD pour démarrer ou interrompre la lecture du CD pour interrompre la lecture pour sauter ou rechercher un passage ou une plage spécifique pour sélectionner un mode de lecture différent (par ex.: SHUFFLE ou REPEAT) et pour programmer les numéros de plages indique les fonctions du lecteur de CD Compartiment à cassette pour sélectionner les stations radio Indicateur de syntonisation pour sélectionner la bande de longueur d'ondes (FM-AM) pour ouvrir le compartiment du disque POWER ON/OFF et pour sélectionner la source sonore : CD-TUNERTAPE prise casque 3,5 mm PANNEAU ARRI�RE pour améliorer la réception en modulation de fréquence prise pour le branchement sur secteur compartiment à piles

Español
Refuerzo dinámico de tonos bajos) � para reforzar los tonos bajos para ajustar el volumen Teclas del cassette para interrumpir la reproducción para parar la reproducción y abrir el compartimiento del cassette para avance rápido de la cinta para avance rápido de la cinta para iniciar la reproducción para iniciar la grabación Botones de CD (disco compacto) para iniciar o interrumpir la reproducción del CD para parar la reproducción para buscar o saltar a una parte o una pista particular para seleccionar un modo de reproducción distinto, por ejemplo, SHUFFLE (mezcla) o REPEAT (repetir) y programar números de pista para indicar las funciones de CD Compartimiento del cassette para sintonizar emisoras de radio Puntero del dial de sintonización para seleccionar la banda de onda (FM-AM) para abrir la puerta del CD interruptor de POWER ON/OFF (apagado/encendido) y selector de la fuente de sonido: CD - TUNER (sintonización) - TAPE (cinta) zócalo de auricular de 3,5 mm PANEL TRASERO para mejorar la recepción de FM enchufe para el cable de la red eléctrica para abrir el compartimiento de la batería

LIMITED WARRANTY
PHILIPS MAGNAVOX PORTABLE COMPACT DISC
One Year Free Exchange This product must be carried in for an exchange.
WHO IS COVERED? You must have proof of purchase to exchange the product. A sales receipt or other document showing that you purchased the product is considered proof of purchase. Attach it to this owner�s manual and keep both nearby. WHAT IS COVERED? Warranty coverage begins the day you buy your product. For one year thereafter, a defective or inoperative product will be replaced with a new, renewed or comparable product at no charge to you. A replacement product is covered only for the original warranty period.When the warranty on the original product expires, the warranty on the replacement product also expires. WHAT IS EXCLUDED? Your warranty does not cover: � labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna systems outside of the product. � product repair and/or part replacement because of misuse, accident, unauthorized repair or other cause not within the control of Philips Consumer Electronics Company. � reception problems caused by signal conditions or cable or antenna systems outside the unit. � a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications. � incidental or consequential damages resulting from the product. (Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.This includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted.) � a product that is used for commercial or institutional purposes. WHERE IS EXCHANGE AVAILABLE? You may exchange the product in all countries where the product is officially distributed by Philips Consumer Electronics Company. In countries where Philips Consumer Electronics Company does not distribute the product, the local Philips service organization will attempt to provide a replacement product (although there may be a delay if the appropriate product is not readily available). BEFORE REQUESTING EXCHANGE... Please check your owner�s manual before requesting an exchange. Adjustments of the controls discussed there may save you a trip. This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province. Philips Service Company, P.O. Box 555, Jefferson City,Tennessee 37760, (423) 475-8869
EL4967E003 / MAC 4108 / 1-97

CD PLAYER
SEARCH � or § Selecting a different track during playback � You can jump to the next track by pressing SEARCH § once. If you want to skip more than one track, press SEARCH § more than once until the display shows the desired track number. � If you want to repeat the running track from the beginning, press SEARCH � once. If you want to repeat one of the previous tracks, press SEARCH � more than once until the display shows the desired track number. Starting with a particular track 1. In the STOP position you can select a desired track using the SEARCH � or § button. 2. Press PLAY�PAUSE 2; to start playback. Searching for a passage within a track You can search for a passage within a track. The CD is played at low volume and at high speed, however, the sound is still recognizable. 1. Keep the SEARCH � or § button pressed during playback, and release the button as soon as you recognize the desired passage: � Normal CD playback will resume from this point. SHUFFLE/REPEAT (see 5) The MODE button allows you to select four different modes which can also be combined with PROGRAM. The modes can be selected or changed during playback and will flash for 2 seconds before playing your selected mode. 1. During playback only, press MODE until the desired function appears on the display. SHUFFLE - Tracks are played in random order. REPEAT ALL, SHUFFLE - Continuous playback of tracks in random order. REPEAT - Continuous playback of the current track. REPEAT ALL - Repeats the entire CD. � During playback you can use SEARCH � or SEARCH § to skip tracks. 2. To leave the SHUFFLE/REPEAT modes, press the MODE button repeatedly until the various SHUFFLE/REPEAT modes are no longer shown on the display. You can also press STOP 9 to quit playback. PROGRAMMING TRACK NUMBERS You may store at most 20 tracks in the memory in the desired sequence. You may store any track more than once. Programming track numbers 1. In the stop position select the desired track using SEARCH � or SEARCH § until the display shows the desired track number. 2. Store the desired track by pressing MODE 6 once. � The display shows P and PROGAM followed by your selected track number. 3. Select and store all desired tracks of a CD in this way. Checking a program 1. To review the set program, in the stop position press and hold MODE for more than 2 seconds. � The display will show the track numbers you have selected in sequence. 2. To start playback of the program, press PLAY�PAUSE 2;. � Playback starts with the first track of the program. After the last track, playback stops and the display shows the CD�s total number of tracks. Erasing a program You can erase the contents of the memory by; � opening the CD door; � setting the source selector to the TAPE or RADIO position. � pressing STOP twice during playback/in the stop position.

TROUBLESHOOTING
If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service center. WARNING: Under no circumstances should you try to repair the set yourself, as this would invalidate the warranty.

EXCHANGING A PRODUCT IN U.S.A., PUERTO RICO OR U.S.VIRGIN ISLANDS... Contact your dealer to arrange an exchange. Or, ship the product, insured and freight prepaid, and with proof of purchase enclosed, to the address listed below. Small Product Service Center Philips Service Company 907 Snapps Ferry Road, Plant 2, Building 6 Greeneville,TN 37743 (In U.S.A., Puerto Rico and U.S.Virgin Islands, all implied warranties, including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the duration of this express warranty. But, because some states do not allow limitations on how long an implied warranty may last, this limitation may not apply to you.) EXCHANGING A PRODUCT IN CANADA... Please contact Philips at: 1-800-661-6162 (French Speaking) 1-800-363-7278 (English Speaking) (In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose. Philips is not liable under any circumstances for any direct, indirect, special, incidental or consequential damages, howsoever incurred, even if notified of the possibility of such damages.) TO GET OUT -OF-WARRANTY EXCHANGE... In U.S.A., Puerto Rico or U.S.Virgin Islands, contact Philips Service Company at (800) 851-8885 to obtain the cost of out-of-warranty exchange.Then carefully pack the product and ship it to the Small Product Service Center (address listed above). In Canada, call the phone number listed above under �Exchanging a Product a Canada� to obtain the cost of out-of-warranty exchange. REMEMBER... Please record the model and serial numbers found on the product below. Also, please fill out and mail your warranty registration card promptly. It will be easier for us to notify you if necessary. MODEL # SERIAL # __________________________________ __________________________________

PROBLEM Set does not react to operation of any control. Display does not function properly. No sound.

POSSIBLE CAUSE � Electrostatic discharge.

REMEDY � Switch off the set, disconnect the power plug and reconnect after a few seconds. � Switch off the set, disconnect the power plug and reconnect after a few seconds. � Adjust the VOLUME. � Disconnect headphones. � Insert new batteries. � Insert the batteries correctly. � Connect the power cord properly. � Replace batteries. � Increase the distance. � FM: aim and extend the telescopic antenna for best reception; (see 2) � AM: rotate the entire set (see 3).

� Electrostatic discharge.

� VOLUME is not adjusted. � Headphones are connected. � Batteries are exhausted. � Batteries are incorrectly inserted. � Power cord is not securely connected.

Bad sound. Severe radio hum or noise. Poor radio reception.

� Batteries are exhausted. � Set too close to TV, VCR or computer. � Weak radio signal.

Poor cassette sound quality.

� Dust and dirt on the heads, capstan or pressure roller. � Use of incompatible cassette types (METAL or CHROME). � Cassette tab(s) may be broken out.

� Clean the heads etc., see Maintenance � Only use NORMAL (IEC I) for recording � Apply a piece of adhesive tape over the missing tab space. � Replace or clean the CD, see Maintenance. � Insert CD. � Insert CD with printed side facing up. � Wait until lens has acclimatized. � Replace or clean the CD. � Switch off the PROGRAM/SHUFFLE function.

Recording does not work.

CD playback does not work.

� CD is badly scratched or dirty. � No CD inserted. � CD inserted upside down. � Laser lens is steamed up.

The CD skips tracks.

� CD is damaged or dirty. � PROGRAM/SHUFFLE is active.