CD PLAYER
CD MODE: Programming track numbers
You can select a number of tracks and store these in the memory in the desired sequence. You can store any track more than once. A maximum of 20 tracks can be stored in the memory. 1 When CD play is stopped, select the desired track with � or §. 2 As soon as the number of the desired track is displayed, press CD MODE to store the track in the memory. � PROGRAM appears on the display. P lights up briefly, then the number of the stored track is shown. 3 Select and store all desired tracks in this way. 4 You can review your settings by pressing and holding CD MODE for more than 1 second. � The display shows all stored track numbers in sequence. If you try to store more than 20 tracks, the display shows F.
Playing the program
Press 2; to play the program.
Erasing the program
From the stop position, press 9. � no lights up briefly, PROGRAM disappears and your program is erased.
Note: The program will also be erased if you: � interrupt the power supply, � open the CD compartment, or � move the POWER slider.
